Problem encountered: The brush failed, the screen is not lit.
Resolution: Found the embedded video to watch and solve.
The reason for the original failure is. One is to choose the wrong file system of the corresponding file. SLC is the corresponding 256M Nandflash, and MLC is the corresponding 2G Nandflash. The second is to copy the superboot to the image directory. The third is the choice of Friendlyarm.ini. (For me, choose to correspond to the SLC).
Here are the steps for the SD card to burn offline Linux systems:
1. Burn Superboot-20111114.bin to sd card with SdFLASH.exe. (Superboot-6410.bin because the comparison pick SD card, so do not choose it).
2. Create the folder images under the SD card.
3. Copy Superboot-6410.bin to images (Friendlyarm.ini requirements are this.) )
4. Copy the Friendlyarm.ini to images directory under folder (ready-to-use configuration file-SLC).
5. Create a new Linux folder under Images, and copy the Zimage,rootfs_qtopia_qt4.img, (rootfs_qtopia_qt4.ext3--, if this is not certain) to the directory.
6. Insert the SD card slot, after the switch is dialed to the Sdboot, the system will be automatically burned when booting.
tiny6410 version ADK Linux system