Ubuntu16 wireless network adapter RTL8723BE frequent disconnection and insufficient signal solution, ubuntu16rtl8723be

Ubuntu16 wireless network adapter RTL8723BE frequent disconnection and insufficient signal solution, ubuntu16rtl8723be

Recently, ubuntu16 was installed on the new computer. As a result, wifi often fails to be connected. After a period of connection, the router is located next to the computer, and the signal is very good.

However, there is no problem in windows, so I went online to find a solution and tried it according to the online method. As a result, many methods are useless.

Finally, the solution is found on askubuntu.

 

First, check the wireless network card model of the local machine:

 1 lmtoo@lmtoo:~$ lspci 2 00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09) 3 00:02.0 VGA compatible controller: Intel Corporation Broadwell-U Integrated Graphics (rev 09) 4 00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09) 5 00:04.0 Signal processing controller: Intel Corporation Broadwell-U Camarillo Device (rev 09) 6 00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03) 7 00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03) 8 00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03) 9 00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #1 (rev e3)10 00:1c.1 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #2 (rev e3)11 00:1c.2 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #3 (rev e3)12 00:1c.3 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #4 (rev e3)13 00:1c.4 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #5 (rev e3)14 00:1d.0 USB controller: Intel Corporation Wildcat Point-LP USB EHCI Controller (rev 03)15 00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03)16 00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] (rev 03)17 00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03)18 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS522A PCI Express Card Reader (rev 01)19 08:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter20 09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 0a)21 0a:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 940M] (rev a2)

Line 1 shows the wireless network card information and the model is RTL8723BE.

We can see from the Internet that the RTL8723 series of NICs have this frequent disconnection problem, except that the BE version is an updated version and a parameter is added.

 

Check the parameters of the RTL8723BE NIC Driver,

 1 lmtoo@lmtoo:~$ modinfo rtl8723be 2 filename:       /lib/modules/4.4.0-22-generic/kernel/drivers/net/wireless/realtek/rtlwifi/rtl8723be/rtl8723be.ko 3 firmware:       rtlwifi/rtl8723befw.bin 4 description:    Realtek 8723BE 802.11n PCI wireless 5 license:        GPL 6 author:         Realtek WlanFAE    <wlanfae@realtek.com> 7 author:         PageHe    <page_he@realsil.com.cn> 8 srcversion:     00619764255210776FAB54D 9 alias:          pci:v000010ECd0000B723sv*sd*bc*sc*i*10 depends:        rtlwifi,rtl_pci,btcoexist,mac8021111 vermagic:       4.4.0-22-generic SMP mod_unload modversions 12 parm:           swlps:bool13 parm:           swenc:using hardware crypto (default 0 [hardware])14  (bool)15 parm:           ips:using no link power save (default 1 is open)16  (bool)17 parm:           fwlps:using linked fw control power save (default 1 is open)18  (bool)19 parm:           msi:Set to 1 to use MSI interrupts mode (default 0)20  (bool)21 parm:           debug:Set debug level (0-5) (default 0) (int)22 parm:           disable_watchdog:Set to 1 to disable the watchdog (default 0)23  (bool)24 parm:           ant_sel:Set to 1 or 2 to force antenna number (default 0)25  (int)

Check the parameters from lines 12th to 25. ips and fwlps are used to control energy efficiency, while ant_sel is used to control signal strength. The most important thing is to modify the default values of these parameters.

 

First, open the configuration driver file.

lmtoo@lmtoo:~$ sudo nano /etc/modprobe.d/rtl8723be.conf

Paste the following parameters to the configuration file:

options rtl8723be debug=1options rtl8723be disable_watchdog=Noptions rtl8723be fwlps=Yoptions rtl8723be ips=Yoptions rtl8723be msi=Noptions rtl8723be swenc=Noptions rtl8723be swlps=N
options rtl8723be ant_sel=2

After saving the configuration file, run the following command to apply the Configuration:

lmtoo@lmtoo:~$ sudo modprobe -r rtl8723belmtoo@lmtoo:~$ sudo modprobe rtl8723be

Is the signal much stronger?

 

 

Reference address:

Http://askubuntu.com/questions/526214/how-to-set-parameters-for-realtek-wifi-rtl8723

Http://askubuntu.com/questions/635625/realtek-8723be-wifi-problem

Http://askubuntu.com/questions/756748/inconsistent-connection-and-super-slow-speed-with-rtl8723be