Virtual machine installation Linux System graphics tutorial

Virtual machine installation Linux System graphics tutorial

• |
• Browse:523
• |
• Updated: 2014-09-16 15:31

• 1
• 2
• 3
• 4
• 5
• 6
• 7

Step through Reading

Installation of Linux Systems

Tools/Materials

• VMware 9.0 virtual Machines
• Linux image iso file
• Related tools can be found here Http://pan.baidu.com/s/1ntA18FJ or please download the use of their own

Method/Step

2. 1

   Open the virtual machine, file-new virtual machine, as

4. 2

   Number of processors: 1 cores per Processor: 2

6. 3

   Virtual machine Memory: 1024MB, Network type: Using Bridge address translation (NAT)

8. 4

   Select the default value for the other items and click "Next" to "finish".

10. 5

    Select the new virtual machine, click on "Virtual Machine"-' Settings '--"HARDWARE"---CD/DVD (IDE), on the other side, select "Use ISO image file" to load the downloaded Linux image file.

12. 6

    Then start installing the system

    "Virtual machine"----"Power"-----"Boot BIOS settings", set as.

    Press F10 to save

14. 7

    Select Skip, this step is whether to detect the Linux system, we choose "Skip", skip detection, and enter, go to the graphical interface, choose Next.

16. 8

    Language select "Simplified Chinese" and click Next.

    Keyboard type, select the default option, and then click Next.

18. 9

    The system default language is selected in Chinese.

    Time zone option, select "Asia Shanghai"

20. 10

    Set Root password

22. 11

    The Linux partition is the key "important".

24. 12

    Linux System General Partitioning principle: "Suitable for beginners"

    1./boot partition size 100M

    2. Swap swap partitions are typically twice times your physical memory

    3./root partition as large as possible

26. 13

    The partition is set up, click "Next"

28. 14

    You can then start the installation to complete the installation, according to the prompts to create a login account more password. After the installation is complete, do not create the boot disk, directly shut down the system (power)

30. 15

    After shutting down, open "virtual machine"--"settings", set to use physical drive

32. 16

    Then enter the BIOS and set the boot mode to hard drive boot. Exit the BIOS and start the Linux system.

    The full screen resolution for Linux is: 1366*768

34. 17

    Complete

Virtual machine installation Linux System graphics tutorial