Vswitch F5 Interconnect

Vswitch F5 interconnect 1. Two Network cables are connected. One inside and one outside the vswitch interconnect port is configured as Access, and F5 switches interfaces to Vlan, the vlan tag does not need to be configured in the same way as the switch interconnect port, but it is recommended to be configured in the same way, so it is easy to differentiate. In the vlan configuration, no tags are required for Untagged, then, associate the vlan with the ip address.

Vswitch F5 interconnect 1. Two Network cables are connected. One inside and one outside the vswitch interconnect port is configured as Access, and F5 switches interfaces to Vlan, the vlan tag does not need to be configured in the same way as the switch interconnect port, but it is recommended to be configured in the same way, so it is easy to differentiate. In the vlan configuration, no tags are required for Untagged, then, associate the vlan with the ip address.

VswitchF5Interconnect

1. Two Network cablesInterconnect, One inside and one outside,VswitchInterconnectPortConfigurationTo Access, F5InterfaceThe Vlan tags do not need to beVswitchInterconnectPortConfigurationConsistent, arbitrary, but recommendedConfigurationSame, easy to distinguish, vlanConfigurationUntagged is selected, and vlan is associated with the ip address.

2. 4 network cablesInterconnectThe Intranet and Internet are bundled separately to increase the link bandwidth,VswitchUpperConfigurationEth-trunk and F5 must start trunk (802.1q, which is not formulated by IEEE, is actually equivalent to link aggregation ),ConfigurationThere are two types:

First:VswitchSide,VswitchAnd F5InterconnectEth-trunkConfigurationChengTrunkAllows the corresponding vlan traffic to pass through. On the F5 side, start trunk-> twoInterfaceMove to trunk-> trunk and associate it with the vlan,ConfigurationVlan,Tag andVswitchPortConfigurationConsistent,Interfaces needs to be marked and untaggedTagged-> Associate a vlan with an ip address.

Second:VswitchSide,VswitchAnd F5InterconnectEth-trunkConfigurationChengAccess, To the corresponding vlan, F5 side,

Start trunk-> twoInterfaceMove to trunk-> trunk and associate it with the vlan,ConfigurationVlan,Tag andVswitchPortConfigurationConsistent,Interfaces is selected without taggingUnTAgged-> Associate a vlan with an ip address.

Liyuan