In general, our computer in the normal mode can not go into the time, by holding down the F8 and then into the safe mode or the last time the correct configuration, and small series appeared once even press F8 did not respond to see how the small set to solve this problem.
1
The specific problem is to turn on the following figure:
2
Appear this problem, if your computer inside not have important thing, personal suggestion or reload system, below say how do not reload to fix!
If you have a USB drive, or if you have a system disk
3
If the USB disk is on the BIOS motherboard settings, set to start the U disk.
WinPE the command prompt tool under the system, and then enter the following DOS command at the cursor position (press ENTER for each DOS command):
4
The commands are:
CD C:windowssystem32
Bcdedit/set {default} osdevice boot
Bcdedit/set {default} device boot
Bcdedit/set {default} Detecthal 1
Effect as shown:
The above is about the Win7 system can not go, press F8 also did not mode how to do, small series according to the above to get down to enter the system.
Note : More wonderful tutorials Please pay attention to the triple computer tutorial section, triple Computer office group: 189034526 welcome you to join