Windows SQL Server R2 install Intel i217-v/i218-v nic Driver (RPM)

1. Download Intel official Driver:
Https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23071&lang=zho

Note to the next 64-bit, download good is calledPROWinx64.exeof the file

2. Use WinRAR right-click to unzip to PROWinx64:

After decompression:




3. Enter\pro1000\winx64\ndis64Directory, findE1d64x64.infFile



4, open the file with Notepad, you can see that there is a paragraph:





From the information below the file can be known,i280-vIs [E1559.6.3.1]:




Corresponding to the paragraph above:



That isE1559.6.3.1Related sections, it is obvious here that this information is in 6.3.1, in 6.3.
So what we're going to do is take this sectionCutTo the following:




All rightSaveCan.

5, modify the signature verification, withAdministrator PrivilegesOpen a command prompt, enter the following two lines, carriage return execution:
bcdedit-set loadoptions disable_integrity_checks
Bcdedit-set testsigning on

And then RestartThe computer.

6. OpenDevice Manager, right-clickEthernet Adapter, because I have installed here, so the device model is displayed, otherwise there is a yellow question mark on the "Ethernet Adapter",



8. Select "Browse the computer to find the driver software”：



10. Select "Choose from a list of device drivers for your computer"


11. Locate the "network adapter" and click Next:



12. Select "Install from disk":



13. Click "Browse":



14. Select the file you just modified\pro1000\winx64\ndis64\E1d64x64.inf, and then tap Open:




15. Click "OK":



16. Find the I218-v in the list:


Click Next to install, you will be prompted to sign the driver, continue to install.

OK, restart the computer, the device is installed, restore the driver signature:
bcdedit-set loadoptions enable_integrity_checks
Bcdedit-set testsigning OFF

Transferred from: http://www.chiphell.com/thread-1076360-1-1.html

Windows SQL Server R2 Install the Intel i217-v/i218-v nic driver (RPM)