Sharing Solution for the use of star speed and DHCP + Internet access

Author: one by one
Original Source: http://mymines.cn/read.php? 122
If you need to reprint the information, please be sure to keep the above information. Thank you!
In the 2008.05 monthly magazine, I wrote an article titled "breaking through isp sharing restrictions". I don't know how everyone is playing. A friend told me that I didn't provide the corresponding solution for the star sky speed and DHCP + Internet access. Today, let's take a look at these two ways of surfing the Internet and the corresponding solutions.
1. fast Internet access to the Stars (China Telecom ):
I don't know, because I am from China Netcom. Baidu encyclopedia once found that the term explanation was an official tone, discussing its advantages: "the function of attracting users is mainly manifested in the positive cooperation with various SP types to enrich the categories, various interesting applications are integrated into the client in the form of plug-ins, and the browsers commonly used by Internet users are seamlessly integrated into the client in a custom form. ", The bundled software plug-ins are called integration based on the current use of commonly used software. So I have to ask, the notorious 3721 is also commonly used software? Typical rape and public opinion. In fact, China Telecom has spent millions of RMB to develop such a client that is full of rogue habits. This is to fundamentally solve the problem of first-line multi-host ADSl users and relieve bandwidth pressure. Of course, bundling software and plug-ins can also make profits for it.
Star speed is actually a rogue client of China Telecom. It limits routing and limits your use of Microsoft's dial-up programs (of course, shared guard's dial-up programs won't work either ), therefore, you can only use it for dialing. Set the IP address in your server network connection to 192.168.200.X (1 <X <255), The subnet mask to 255.255.0, the gateway to 192.168.200.1, And the DNS server to the IP address of the DNS server provided by the isp. Then install the shared guard. In the setup wizard, click Next and select "dial-up mode". In the next step, enter the account and password (whatever you want). In the next step, set the gateway to 192.168.200.1, next, select the connection method. Make sure to select "Manual dialing ". In this way, the idea is clear. Instead of using the dial-up function of the shared guard, you can use the star to speed up the dial-up. Then, open the shared guard work window and select "Start service.
2. DHCP + Internet access (Henan Netcom ):
Netcom's DHCP +, as its name implies, adds the network connection packet analysis and monitoring and management module to restrict user sharing bandwidth based on the standard DHCP Host Configuration Protocol.
The DHCP + authentication process is as follows: the DHCP user finds the DHCP server through broadcasting and selects one of the Multiple DHCP servers in response to the request. After receiving the request, the DHCP server authenticates the user's information, after you confirm that you are a valid user, you can transmit the relevant parameters, such as the IP address, DNS server, subnet mask, and gateway address, to the user. After obtaining these parameters, the user can directly access the Internet for communication, and all communication streams do not need to go through the DHCP server.
DHCP + Internet access users need to use the 1.0413 version of shared guard, which takes effect after the default installation. After the DHCP + dial-up software client is started, set the network connection to be as fast as using the starry sky. If not, read the May journal. Run the shared guard, click the setting wizard, select "access through fixed ip Address", next, select single Nic mode, and next, set the virtual gateway ip address to 192.168.200.1. The setting is basically the same as the use of the star sky speed.
In general, the two methods share the dialing function of the guard, and use "official client dialing. After successful dial-up connections, you can manually enable the shared guard service to break through the sharing restrictions.
For DHCP + mode, you can convert it to pppoe connection and use Microsoft's Connection Client to dial. In this way, you only need to obtain the real user account to dial up. This account conversion tool can be found online. If you are interested, try it.