Apple Computer FAQ

Source: Internet
Author: User

1. How to create a shortcut icon on the desktop of an Apple computer?

On the Apple Computer, the shortcut icon does not exist and is replaced by a stand-in. Because the Apple computer on the dial on the Internet and the program is different from the PC, it can directly dual access to the Internet software, by the Internet software dial number online, so there is no like the PC on the dial number on the Internet icon. The way to do this is to set up the dialing program by software that supports TCP/IP in TCP/IP in the control panel of the Apple Computer.

2. What are the most difficult hardware for the Apple machine to fail?

There is no definitive answer as to whether the Apple machine is out of fault or when it will fail. It depends on the model. General 8100 of the machine, the power supply often problems; the white G3 machine, the hard disk is often problematic, if used improperly, the machine's SCSI port is easy to burn out, 1710 of the old monitor is the most prone to problems, often the problem of the backplane, the laser printer's heating part is prone to failure. Problems may also occur with motherboards on some machines.

Can the image file created on the 3.PC machine be able to open the edit directly from the Apple computer? Is the reverse OK?

PC built on the picture, PC generated on the pure text file, that is, TXT file can be directly on the Apple Computer to open the editor, in turn, as long as you can read out on it. Files generated on the Apple computer if you want to go to the PC to use, pay attention to the format of the save, and sometimes Apple pc points. Other files generated on the PC, usually need to have the corresponding software conversion before they can be applied to Apple. Now some such as Office files, PageMaker files, and so on. The EXE, COM and other executable files on the PC can not be run on the Apple Computer.

4. When operating a software, the Chinese characters on the desktop suddenly can not be displayed, this is what aspects of the problem?

The problem is generally Chinese Language Component, the Chinese language kit. Generally, the system does not match the version of the Chinese language suite, or the system has minor problems. The solution is to reload the Chinese language kit or completely reload the new system.

5. What do you mean when an Apple Computer error shows 2 types and 10 types?

This is the Apple Computer error signal, the type can initially determine the machine's problem. such as 1, 10 type is the system bus error, often associated with memory. There are software that can tell you all the wrong types of meaning.

6. A disc formatted in a USB MO drive cannot be read in a SCSI MO drive and the drive spits out the disc?

In general, there is a problem with the disc, reformatting can be resolved. If the problem persists, note that the format of the platter and the drive itself are intact.

7. What is the problem of storing MO files on an Apple machine that are not open on other machines?

In the Apple machine to deposit Mo file, if on the other Apple machine can not open, take back and then open, usually Mo drive has problems. If you get it back, it's not open, it's a platter problem. If used on the PC, that is the format of the problem, Apple and PC MO disc format is different. You can usually format Mo platters on your PC and use them on the Mac. You can also install a software on a PC, such as Fujitsu's original installed software, you can read the Apple Computer format Mo platter.

8.Finder What's the problem with quitting unexpectedly?

The reason for the Finder's unexpected exit is more complex, possibly a software problem, a hardware problem, or a virus. The software is related to the version of the operating system, and the stability of different versions on different machines is different, and the compatible application software varies. This is the most common phenomenon. Next is the virus. If the system used to be stable, after a while, the Finder often quits unexpectedly, often as a result of the virus. Hardware is often the quality of memory does not pass.

9.USB lithography machine in the burning to 80% when the crash, reload system and drive, lithography in the engraved to 80% normal, the remaining 20% will be completed in a short period of time, remove into the optical drive can not read the disk, and burner settings related?

Once the disc is dead, the discs burned may not work. The problems that occur after reloading the system may be related to the Platters and settings. One aspect is correct and it is possible to avoid the above situation.

Related Article

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.