Computer boot blue screen stop code 0X0000006B solution

Computer error, to a blue screen, if the screenshot of the blue screen can not give the name of the file that led to BSOD, then still need users to remember what was done before the screen? There should be clues to the trail!

1, first look at this blue screen cut the picture of what?

A problem has been detected and Windows have been shut down to prevent damage to your computer.

A problem has been found and Windows has been shut down to prevent damage to your computer.

Reviews: Viruses, trojans, bad programs, even the famous program will be the culprit of blue screen!

2, process1_initialization_failed

The initialization process for the first time failed.

Reviews: The operating system has also done a reply to the efforts, but beyond resurrection!

3. If this is the first time you ' ve seen this Stop error screen,restart your computer. If This screen appears again follow these steps:

If this is the first time you have seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Reviews: Indeed, some blue screen can be restored to normal by restarting the computer itself, such as bad memory bar contact.

4, if the blue screen stop code constantly changing, then it may be possible to power off, open the chassis, Plug and unplug memory, wipe gold fingers, may be improved.

5. Check to make sure any new hardware or software is properly installed. If this a new installation, ask your hardware or software manufacturer for any Windows updates you might need.

Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you may need.

Reviews: If you have installed a device or driver before, it is possible that the device or driver is incompatible.

6, If problems continue. Disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to the use of Safe Mode to remove or disable Components,restart your computer,press F8 to select Advanced Startup Opt Ions,and then select Safe Mode.

If the problem continues. Disable or remove any newly installed hardware or software. Disables BIOS memory options, such as caching or shadowing. If you need to use Safe mode to remove or disable components, restart your computer, press F8 to select advanced boot options, and then select Safe Mode.

7. Finally, the most important message:

Technical Information (technical information):

The memory overflow address behind the stop:0x0000006b (shut down code 6B) is meaningless to ordinary users.

8, download a blue screen code finder, input blue screen simple code, the software will give a reference reason.

Code: 0X0000006B

Cause: The program has stopped because the surrogate disk has not been inserted.

9, the use of keywords to Microsoft's Knowledge base, may also encounter the "Blue Friends" of Freemasonry, to see if there are successful solutions to be used for reference.

10, in fact, the computer operating system will leave the system log (set in advance), using software to view more reliable!