Computer error code Summary

Meaning of a hard disk fault prompt
(1) date error (data error)
There is an irreparable error in the data read from a floppy disk or hard disk. the disk has bad sectors and
Bad File Allocation Table.

(2) hard disk configuration error (hard disk configuration error)
The hard disk configuration is incorrect, the jumper is incorrect, and the hard disk parameter settings are incorrect.

(3) hard disk controller failure (hard disk controller failure)
The Controller Card (multi-function card) is loose, the connection is incorrect, and the hard disk parameters are incorrectly set.

(4) hard disk failure (hard disk failure fault)
Controller Card (multi-function card) fault, hard disk configuration is incorrect, jumper is wrong, Hard Disk
Troubleshooting.

(5) hard disk drive read failure (hard drive read failure)
The Controller Card (multi-function card) is loose, the hard disk configuration is incorrect, and the hard disk parameter settings are incorrect.
Indeed, the hard disk records data corruption and so on.

(6) No boot device available (no boot device)
The system cannot find a floppy disk or hard disk as the boot device.

(7) No boot sector on hard disk drive (no boot sector on the hard disk)
The Boot Sector on the hard disk is lost, infected with viruses or incorrect configuration parameters.

(8) Non system disk or disk error (non-system disk or disk error)
The disk used as the boot disk is not a system disk and does not contain system boot and core files, or
The disk is faulty.

(9) sectornot found (sector not found)
The system disk cannot locate a given sector on a floppy disk or hard disk.

(10) Seek error (search error)
The system cannot locate a specified sector, track, or head on a floppy disk or hard disk.

(11) reset failed (Hard Disk reset failed)
The circuit of the hard disk or hard disk interface is faulty.

(12) fatal error bad hard disk (Hard Disk fatal error)
Hard disk or hard disk interface failure.

(13) No hard disk installed (no hard disk is installed)
The hard disk is not installed, but the hard disk is set in the CMOS parameter;
Hard drive letter is not properly connected, hard drive card (multi-function card) is not plugged in;
Hard drive or hard drive card failure.

The code for disk failure 2 is shown in the table
Code meaning
1700 Hard Drive System pass (normal)
1701 unrecognized Hard Drive System
1702 hard disk operation timeout
1703 An error occurred while selecting the hard drive.
1704 hard disk controller failure
1705 records not found
1706 write operation failed
1707 signal errors
1708 incorrect head selection Signal
1709 ECC Test Error
1710 slice buffer overflow when reading data
1711 bad address mark
1712 unrecognized errors
1713 data comparison Error
1780 hard drive C fault
1781 D disk faults
1782 hard disk controller Error
1790 drive C Test Error
1791 disk D Test Error

ADSL error code table

Error 602 the port is already open
Problem: the dial-up network cannot be connected due to a device installation error or in use.
Cause: raspppoe is not fully and correctly installed.
Solution: uninstall and reinstall any pppoe software.

Error 605 cannot set port information
Problem: the port cannot be set for the dial-up network due to device installation errors
Cause: raspppoe is not fully and correctly installed.
Solution: uninstall and reinstall any pppoe software.

Error 606 the port is not connected
Problem: the dial-up network cannot connect to the required device Port
Cause: raspppoe is not completely and correctly installed, connection line failure, ADSL Modem
Fault
Solution: Uninstall any pppoe software, reinstall it, and check the network cable and ADSL.
Modem

Error 608 the device does not exist
Problem: the device connected to the dial-up network does not exist.
Cause: raspppoe is not fully and correctly installed.
Solution: uninstall and reinstall any pppoe software.

Error 609 the device type does not exist
Problem: the type of the device connected to the dial-up network cannot be determined.
Cause: raspppoe is not fully and correctly installed.
Solution: uninstall and reinstall any pppoe software.

Error 611 the route is not available/612 the route is not
Allocated
Problem: the dial-up network connection route is incorrect.
Cause: the raspppoe is not fully and correctly installed, and the ISP Server is faulty.
Solution: uninstall and reinstall any pppoe software, and call the ISP to ask

Error 617 the port or device is already Disconnecting
Problem: the device connected to the dial-up network has been disconnected.
Cause: raspppoe is not completely and correctly installed, ISP Server is faulty, connection line
, ADSL modem fault
Solution: uninstall and reinstall any pppoe software. Call your ISP to check the software.
Network cable and ADSL Modem

Error 619 problem: unable to establish a connection with the ISP Server
Cause: adsl isp Server fault and ADSL Telephone Line Fault
Solution: Check whether the ADSL signal lights are correctly synchronized. Call ISP to ask

Error 621 cannot open the phone book file
Error 622 cannot load the Phone Book File
Error 623 cannot find the phone book entry
Error 624 cannot write the Phone Book File
Error 625 invalid information found in the phone book
Problem: Windows NT or Windows 2000 server network Ras network component failure
Cause: Uninstall all pppoe software and reinstall the RAS network component and raspppoe.

Error 630
Problem: no response from ADSL Modem
Cause: ADSL telephone line fault, ADSL modem fault (power supply not open, etc)
Solution: Check the ADSL Device

Error 633
Problem: the dial-up network cannot be connected due to a device installation error or in use.
Cause: raspppoe is not fully and correctly installed.
Solution: uninstall and reinstall any pppoe software.

Error 638
Problem: after a long time, you cannot connect to the ISP's ADSL Access Server
Cause: ISP Server fault; you are wrong in the poor connection created by raspppoe
Enter a phone number
Solution: Run raspppoe.exe with the specified number to check whether the ISP service can be listed,
To ensure that the ISP is normal; clear the phone number in the used dial-up connection or only retain
Leave a value of 0.

Error 645
Problem: The NIC does not respond correctly
Cause: Nic fault or NIC Driver fault
Solution: Check the NIC and reinstall the NIC Driver.

Error 650
Problem: the remote computer does not respond and the connection is disconnected.
Cause: adsl isp Server fault, Nic fault, abnormal shutdown, resulting in network protocol
Error
Solution: Check whether the ADSL signal lights are correctly synchronized. Call the ISP to check the network card.
To delete all network components and reinstall the network.

Error 651
Problem: Error reported by ADSL Modem
Cause: Windows is in safe mode, or other errors
Solution: When this error occurs, repeat it to report the specific error code.

Error 691
Problem: the user name and password entered are incorrect. A connection cannot be established.
Cause: the user name and password are incorrect, and the ISP Server is faulty.
Solution: use the correct user name and password, and use the correct ISP account format
(Name @ Service), call the ISP to ask.

Error 718
Problem: no response is returned when the remote computer times out when the user name is verified. The connection is closed.
Cause: adsl isp Server fault
Solution: Call the ISP to ask

Error 720
Problem: the dial-up network cannot coordinate server protocol settings in the Network
Cause: the adsl isp Server is faulty. An abnormal shutdown may cause a network protocol error.
Solution: Call the ISP to delete all network components and reinstall the network.

Error 734
Problem: the PPP Connection Control Protocol is suspended.
Cause: the adsl isp Server is faulty. An abnormal shutdown may cause a network protocol error.
Solution: Call the ISP to delete all network components and reinstall the network.

Error 738
Problem: the server cannot assign an IP address
Cause: the adsl isp Server is faulty. Too many ADSL users exceed the IP addresses that the ISP can provide.
Address
Solution: Call the ISP to ask

Error 797
Problem: The ADSL Modem connection device is not found
Cause: the power supply of the ADSL modem is not enabled, and the connection line between the nic and adsl modem appears.
Problem: after the software is installed, the corresponding protocols are not properly bound. When a dial-up connection is created
, An invalid null connection is established.
Solution: Check the power supply and connection lines; check the network properties. The Protocol related to raspppoe is
Are you sure you want to correctly install the NIC and set the relevant protocols? No. Or!
And set it to enable; check the dial-up connection attributes, whether the device is connected
A device named "ISDN channel-adapter name (XX)" is used.
An empty device. If you cancel it and select the correct pppoe device to replace it.
Or create a new dial-up connection.

It is often the case that blue screens appear on Windows, and every error is caused by an unclear error.
The system is frequently re-installed from the source, which is time-consuming. Some of the following Windows crashes
Code for your reference.

0x0000 completed
0x0001 incorrect function
0x0002 the system cannot find the specified file
0x0003 the system cannot find the specified path
0x0004 the system cannot open the file
0x0005 Access Denied
0x0006 Invalid code
0x0007 memory control module damaged
0x0008 insufficient memory, unable to process this command
The address of the 0x0009 memory control module is invalid.
The 0x000a environment is incorrect.
0x000b tries to load a program with an incorrect format
0x000c access code error
0x000d data error
0x000e memory space is insufficient. This operation cannot be completed *
The specified hard disk cannot be found in 0x000f.
0x0010 cannot remove the Directory
0x0011 the system cannot move files to other hard disks
0x0012 no files
0x0019 cannot find the specified sector or track
The disk or disk specified by 0x001a cannot be accessed.
0x001b the disk cannot find the required sector
0x001c printer no paper
0x001d the system cannot write data to the specified disk.
0x001e the system cannot read the specified device
0x001f a device connected to the system does not work
Part of the 0x0021 file is locked
0x0024 too many shared files are enabled
0x0026 to the end of the file
0x0027 the disk is full
0x0036 Network busy
0x003b unexpected network error
0x0043 network name not found
0x0050 files already exist
0x0052 cannot create directories or files
0x0053 int24 failed
0x006b the program has stopped because the substitute disk has not been inserted.
0x006c disk in use or locked
0x006f the file name is too long
0x0070 insufficient hard disk space
0x007f cannot find the specified program
0x045b is shutting down
0x045c cannot shut down the planting system, because no shutdown is in progress
0x046a unable to process this command because the storage space of the available server is insufficient
0x047e: the specified program requires a new Windows version.
0x047f the program specified is not a Windows or MS-DOS Program
0x0480 the specified program has been started and cannot be started again
The program specified by 0x0481 is written by the old Windows version.
0x0482 destroy one of the library files required to execute this application
0x0483 no application is associated with the specified file for this operation *
0x0484 An error occurred while sending commands to the application
The device name specified by 0x04b0 is invalid.
0x05a2 window is not a subwindow
0x05aa the required service cannot be completed due to insufficient system resources
The 0x05ab system is insufficient to complete the required services.
The required service cannot be completed due to insufficient system resources of 0x05ac.
The operation cannot be completed due to insufficient resource 0x06b9