Computer Post how to cancel

1. Press the DELETE key to enter the BIOS, go to the Advanced Configuration page, locate the Quick boot entry, and set it to Enabled. Will skip the self-test

2.2000/XP is the use of chkntfs/x, such as disabling D-disk

chkntfs/x D:

If it is Windows98:

98 Msconfig tools that can be used with the system

In the input box for run, type "msconfig" and press the "OK" button. This will start the System Configuration Utility, click on the "Advanced" button in the General tab, and then select "If shutdown fails, disable ScanDisk" Before the box is ready.

Case Practice Analysis:

How do I cancel post?

Sometimes the computer is not normal shutdown, and then the boot will appear self-test, to wait for it, there is a disk in a damaged file will be self-test every time, to want the computer is not self-checking, very simple, if it is 2000/XP system, as long as the run:

chkntfs/t:0

chkntfs/x C:

It's OK.

chkntfs/t:0 Set the self-test wait time to "0", of course, you can also customize the wait time

chkntfs/x C: Can cancel the boot to the C-drive automatic scanning, can also be changed to other disks

2. How to cancel boot to memory self-test multiple times

Some computer post, always check the memory repeatedly cause the boot speed is very slow, this is due to improper motherboard BIOS setup. You can enter the BIOS setup by pressing the DEL key in the boot, then select "Standards BIOS Setup", then locate the "Quick Test" setting item in it, set its value to Enabled, and save the setting to exit, so that only one memory will be detected at the start of the self test.

3. Run chkntfs/x D:

4. Boot to Recovery Console

Execute it yourself. Chkdsk D:/F

5. Run Msconfig prohibit ScanDisk off