Http://www.1390371.com/wap/009.htm
When the GPRS mobile phone connects to the computer to access the Internet (in combination with all the mobile phones with GPRS data lines or infrared Bluetooth enabled), dial up and establish a connection to the computer system to install the mobile phone's USB driver, after the mobile phone is connected to the laptop and computer through a data cable, the Device Manager will add the (NEC) morden
As follows:
1. computer network connection, select "Create a new connection" "Next" --- "manually set my connection" and "Next" --- "connect with a dial-up modem" and "Next" if there is a modem. if you need to select none, it will go to the next window.
2. then fill in the "ISP name", for example, "move" and "Next" (This field is not important) --- fill in "* 99 #" or "* 99 *** 1 #" in "the phone number to be pulled out" (here 1 # indicates the first GPRS setting in the mobile phone, 2 # is the second network setting, and so on), and then "Next" --- in "Internet account information", "User Name" is blank, the password is blank, and "Next ". To complete.
3. # If you are using a notebook: in fact, it should be set up at this time, you can dial, if you find that the PPP Connection Control Protocol is terminated after each dial-up, choose Settings> data connection> GPRS modem settings> modify access point. The default value is cmnet, if you do not have this access point, you can successfully dial it after you change it to cmwap. Therefore, it is best to run "Control Panel"> "NEC or other mobile phone modem settings" and fill in "cmwap" in "GPRS Access Point"
4. set proxy server: Run "Control Panel"-> "Internet Options", select the "connection" page, and select "move" just created in "dial-up and virtual private network settings ", click "Settings" to bring up "Mobile Settings". On the proxy server, click "use proxy server for this connection" to make it valid. In the "Address" below, enter "10.0.0.172 ", enter "80" for "Port", and confirm to complete the settings.
5. Everything is done. It is best to restart the computer once and enter the system again. In "network connection", run "move" (whatever you fill in) to pull the code and click IE to access the Internet. If you find that the website cannot be opened, but you enter a website, the page shows not found. In fact, this is a very frequent issue recently. I don't know about the internal upgrade of mobile devices. However, each time I disconnect and reconnect, the connection lasts for several times, up to 10 times, and can finally be connected to the network.
If you can't do this for 10 times, we recommend that you restart it again, and then I will be able to get it in 90%.
If not, use another browser!
You must set the HTTP proxy to "10.0.0.172: 80" for other download software such as QQ and MSN"
# When the web page cannot be opened, QQ can still use the 10.0.0.172 proxy.
The above is my setup experience. Please correct me if you have any questions.
Computers access the Internet through mobile phones (applicable to various mobile phones)
The dynamic zone in Zhengzhou has a RMB GPRS monthly-paid Internet speed service. You can use a mobile phone as a modem to connect your mobile phone to your computer and use a proxy server to access the Internet, the monthly fee for Internet access is 10 RMB. I saw a lot of posts in Dangdang. I have a little more comprehensive information and posted it for your reference. You can choose to use your mobile phone.
When the mobile phone is connected to the computer for Internet access, dial * 99 ***** 1 # (cmwap) or * 99 ***** 2 # (cmnet ), currently, many mobile phone cards have cmwap monthly subscription services with unlimited traffic. cmnet does not have monthly subscription traffic and is charged at 0.03 RMB/K. What is this concept? That is to say, if you browse Sina for an hour, you will have to pay about 100 Yuan!
Therefore, we only dial * 99 *** 1 #, that is, we use cmwap monthly subscription to access the Internet. However, ie cannot enable data transmitted through cmwap. What should we do?
This method meets the requirements for mobile phones
1. Bring your own phone modem (mostly available)
2. The mobile phone supports GPRS and activates the Internet speed business in the dynamic zone of Zhengzhou.
3. The mobile phone can be normally connected to the computer (data cable, Bluetooth, and infrared)
You can solve this problem by modifying the registry. The following describes how to modify the registry settings. For details, refer:
First, modify the computer registry
A: Choose Start> Run and enter Regedit to open the Registry Editor.
B: Find the following items in the Registry: HKEY_LOCAL_MACHINE/software/Microsoft/Windows/CurrentVersion/Internet Settings/5.0.
C: Create a new user agent in 5.0, and then create three new string values with the name compatible, platform, and version in the newly created user agent.
D: Modify the three strings and the original default characters (double-click the string value) to any string, such as AAD, ffg, and gft.
E: Turn off the Registry Editor.
Modify the computer's IE browser
A: Open your IE browser and choose tools> Internet Options> connect, in the "dial-up and virtual private network settings" column, find the phone modem you installed (installed after the phone modem driver) and click. click "Settings"
B: Select "use proxy server for this connection (these settings are not applied to other connections)" in the check box )"
C: Select advanced options.
D: Check "use the same proxy server for all protocols"
E: Enter 10.0.0.172 in the address bar and enter 80 in the backend port.
F: OK. Click OK.
Regardless of the settings used, you must do the following:
1. The mobile phone must be set as a cmwap Access Point and port 80 (if not, change it to 9201)
2. You must install the driver (U **, infrared or Bluetooth) used to connect your mobile phone to your computer)
If you cannot access the Internet, you need to check the connection status of your mobile phone:
1. You must install the software (U ** or another data connection driver) attached to your mobile phone to connect to your computer. Check whether the software has been installed.
2 to 1, Nokia mobile phone has its own PC kit installation CD, water goods Nokia can go to the Nokia official website free download package installation program. The Moto mobile phone also has its own mobilephonetools installation disc, and other mobile phones should be similar. In short, make sure that your mobile phone can be connected with your brain properly.
There is a simpler way to change the registry!
To download a browser Opera, set the proxy server to 10.0.0.172 and port 80 in opera. Try again. Have you opened the webpage?
The introduction to opera is as follows:
There are still many machine friends who cannot use cmwap monthly subscription + laptop + mobile phone to access the Internet. After many experiments, they can finally become a functional software: ie6.0 opera kmeleon, etc.
The specific method is as follows:
1. Use opera and kmeleon settings
1. The connection between the mobile phone and the computer is the same as above.
2. Install a browser
A. For kmeleon:
Open kmeleon and choose tools> User Agent> Custom... enter a username and remove the check box before reset to default on exit.
Then you need to go to the menu edit and enter preference. In the displayed dialog box, click proxy on the left and then select manual proxy settings on the right, enter 10.0.0.172 in the following HTTP, FTP, SSL, Gopher, and socks address columns, enter 80 in the backend port, open the GPRS manager after the proxy server is set up, and dial up the Internet cafe.
B. For Opera:
After opera is installed, choose tools> preferences> advanced. Select "Meie 6.0" in the browser identification item at the bottom ". click "network"-> proxy server in the options on the left, check HTTP, https, FTP, Gopher, WAIS, and enter port: 80 10.0.0.172 in the address bar, dial-up Internet cafes.
For the download links of the above two software, see
About QQ:
In the 'menu '-> system settings-> proxy settings, select 'HTTP proxy Server'. In the server option, enter
Enter port 10.0.0.172: 80.
Use line E to set up GPRS to connect the computer to the Internet (refer)
We recommend that you use the "China Mobile elastic client", which can be found at "http: // clients ".
After the software is installed, connect your mobile phone to your computer
Open the "Auto Release" software, click manual connection, select "GPRS", select "Standard modem over IR link", and click "Connect" to access the Internet.
At this time, the APN is the default "cmnet". If there is no package service, the fee is charged by kb3. The following describes how to save money.
RMB 20 GPRS is free of traffic for monthly subscription. Its APN is "cmwap", which can only be used on WAP websites. It cannot browse www websites or use common Internet services, such as QQ and email, however, you can set a proxy.
Disconnect, select "GPRS" in "Tools"> "connection settings" of "Sui exing" software, click Settings, and change "APN: cmnet" to "cmwap ", save the settings and connect them manually;
Choose tools> Internet Options> connection in IE, select China mobile client, and click set ", in the "Proxy Server" column, tick "use proxy server for this connection", enter "10.0.0.172" for the address, and enter "80" for the port. OK, now, you can browse common web pages with peace of mind. If you have activated a 10 yuan monthly subscription, you will find 10 items.
I would like to tell you that, because China Mobile provides the e-line service, it must be a cmnet access point, and cmnet only has 200 yuan/month. Otherwise, it will be 3 points/K, therefore, please be cautious when using mobile with e-line software to dial up the Internet !!!
Solutions to QQ and other software problems
If you want to use QQ, select "HTTP proxy" in "Network Settings" of QQ. The address and port are still "10.0.0.172" and "80 ".
Because cmwap has already accessed Internet via China Mobile, such as Internet Explorer, flashget, and MSN, these three software cannot work. If you want to use opera for Internet browsing, you need to set it. For tools/preferences/advanced/networks/proxy servers, fill in 10.0.0.172 and port 80. In the same location, select "identification as opera" for "browser recognition" in the tool/preference/advanced/Network ".
QQ is not blocked yet. Select "use custom network settings" in the menu, system settings, and proxy settings, set the type to "HTTP Proxy Server", set the server to 10.0.0.172, and set the port to 80.
Some people may ask what software does not support HTTP Proxy? See the following:
In addition, you must first install CCProxy and sockscap.
The CCProxy settings only need to be modified. The default value is used for other settings. Changes:
Set-> advanced-> secondary proxy, select "enable secondary proxy", the proxy address is "10.0.0.172", the proxy protocol is "HTTP", and the port is "80 ".
Sockscap settings:
File-> setting: the SOCKS Server is set to "127.0.0.1" and port "1080". Other settings can be left unchanged.
Drag the software you want to use, such as IE, to sockscap.
For later use, you only need to start CCProxy and then start sockscap. To run IE, just click the icon in the sockscap window.
Now all the software except outlook can be used to access the Internet, and the cmnet function has been implemented. below is the software that can be successfully connected.
Surfing the internet-myie, opera, Firefox
Email-Foxmail
Download-flashget (20 mb software has been successfully downloaded)
Chat-QQ & msn
Games-QQ games, lianzhong, and online Chinese games
Anti-Virus-McAfee and rising (online upgrade)
Note: It is best to use (10.0.0.172: 80) Direct proxy for software that supports direct HTTP proxy, because it is slow to use CCProxy and sockscap.
Summary
To access the Internet through a mobile phone, use the mobile phone as a modem ,'~~~
The key is to have a built-in modem on your phone ~~~~
If the mobile phone has a built-in modem ~~ In general, a dial-up Internet Access software will be sent '~~~~~
We only need to change the software connection port to cmnet for cmwap connection '~~~~~
You can use your mobile phone or computer to access the Internet. You can use three access methods: cmwap, cmnet, and CSD.
CSD: charges are calculated by time, but the speed is slow. You don't have to consider it. The fee is 0.15 RMB/minute.
Cmnet: the data traffic is charged at a speed of 40 kbps. The fee is 0.03 RMB/kb, and the plan is 200 RMB 500 m, more than 0.01 RMB/kb, that is, 10 RMB/MB ,. you can access the WWW and WAP websites, which is too expensive to consider.
Cmwap: the data traffic is charged at a speed of 40 kbps. The billing standard is 0.03 RMB/kb. In some cases, there are 10 RMB subscription packages, which can only be used for WAP websites. if you use the above method to access the Internet, you can access the WWW website.
Cmnet cmwap accesses the Internet in GPRS mode. The CSD mode is the dial-up Internet access mode. This method is used when GPRS is not activated.
Note: For users who have previously activated GPRS but have not yet activated cross-network speed vehicles, note that in this case, the cross-network speed service will only be activated next month for the sample textsample Text :):)