Computer mouse does not respond to the causes and solutions

The mouse did not respond to what happened? Used to have been good, today suddenly can not use, ask how to solve? Generally, the mouse does not respond, mainly divided into 2 kinds of hardware failure and software failure, hardware failure needs to repair or replace the solution, and software problems, you can set up a computer solution. The following small series for you to analyze the mouse did not respond to the cause and solution, encounter similar computer failure of friends, may wish to see.

The mouse does not respond to the cause of the mouse not responding to the solution

The mouse interface is generally divided into USB or PS/2 two kinds of interfaces, of which PS/2 is the most common desktop computer mouse interface, and USB interface mouse can also be used by the user desktop laptop. Encountered, the mouse does not react first do not worry, the first thing to do is to check whether the mouse and the computer is normal connection, you can re-plug it, and then restart the computer, to see if the mouse is normal, if the mouse can be used normally, it may be that the previous contact is bad or did not plug well caused.

If the mouse is still unresponsive, you can check the following areas.

1, check the mouse at the bottom of the light is shining, if not light, it means that the mouse is not plugged in or the mouse is broken, it may be the computer's mouse interface problems.

For this situation, we can first check the mouse is inserted correctly, check the correct, still not bright, the basic can be concluded that the mouse is broken or computer interface problems. In the end is a mouse failure or computer interface failure, you can borrow a can use the mouse connection to try, or the mouse in a normal interface on the computer, to see if normal, through the elimination method, it is clear whether the disk end is a mouse or computer interface problems.

If the mouse problem is determined, the general replacement of the mouse can be (www.pc841.com computer Pepsi net). If it is a problem with the interface, the desktop can buy a USB mouse, connect the USB interface to use, of course, can also purchase a PS/2-USB conversion interface can be. If it is a laptop USB interface problem, you need to take to repair or directly without the mouse, with the help of the notebook touch pad operation.

Mouse indicator light on

2, mouse indicator light on, but the mouse does not respond

For this situation, the mouse and the computer is connected to normal, if not after all, can be used in the computer Device Manager, check the mouse driver is normal.

How do I open Task Manager without a mouse? The method is simple, use the combo shortcut "Win + R" To open the Run dialog box, and then type the command: devmgmt.msc when finished, press ENTER to confirm, as shown in the following figure.

3. After you open Task Manager, use the TAB key to switch to the following hardware options, then use the down arrow on the keyboard to move to "mouse and other pointing device" press ENTER to expand to see if the driver is normal, if the driver with an exclamation point, then the mouse driver has a problem, need to install the driver solution.

Installing the mouse driver is generally simple, as long as you download the computer to install a Driver wizard or to drive life and other tools, you can detect the installation of faulty hardware drivers online.

If you check the driver and there is no problem, it may be a mouse failure, the best way is to plug in another computer to try or take other mouse to plug their own computer to try is not useful.

At the end of the article attached to the more classic solution

The mouse sometimes reacts, proving that the driver is installed correctly. There is light, which represents the interpolation method correctly. The mouse is changed, which means there is no exception for the mouse. The only thing left is the computer problem. There are several reasons for this.

1) The most likely reason, the computer interface in the long-time oxidation and electrostatic physical effects, rust caused by poor contact, it is not good to prove that a little bit useless.

Workaround: Try to fix the interface after plugging it, or switch to an interface. This reduces the chance of contact failure, which proves that the computer has been in use for a long time, trying to clean the interface or simply changing parts.

2) motherboard cracked or original damaged. The line error will also be reflected as above in some cases, if this is the problem, it is recommended to send maintenance point processing.

The mouse does not respond to the reasons, although many, but as long as the understanding of some ideas, quickly can find the reason, on the small compilation experience, the mouse is not what expensive hardware, the price is very cheap, also very easy to carry, if the book mouse does not respond, you can take to other computers to try, check the mouse is not broken, or simply borrow or buy a new mouse to plug the computer, to determine whether the computer is not a problem, as long as the computer interface is not a problem, is generally the driving problem, installed a drive tool can be solved.

Note : More wonderful tutorials Please pay attention to the triple computer tutorial section, triple Computer office group: 189034526 Welcome to join