Samsung i9100 mobile phone shared computer network

Notebook

First, check whether your computer's wireless network card supports the bearer network,

Method: Open the command prompt (CMD) on your computer and enter the command: netsh WLAN show drivers,
After you press enter, a line is displayed. "supported Bearer Network: Yes (if supported, yes is displayed ). If not, update your wireless driver.

After installing the driver, run the netsh WLAN show drivers command,
Check whether the bearer network is supported. If yes, continue with the following steps.

1. Run the command prompt as administrator, right-click "command prompt", and select "Run as administrator ".

2. Enter the command at the command prompt:
Netsh WLAN set hostednetwork mode = allow SSID = Name of the wireless network you want
Key = the password you want to set (we recommend that you set a 10-bit password with at least 8 digits ).

3. Open the network sharing center-change the adapter settings,
You will find that there is an additional Microsoft Virtual WLAN miniport adapter,
This is the wireless network adapter we just virtualized.

4. Enter netsh WLAN start hostednetwork in the command prompt.

5. This step is to open the virtual wireless network, so that your mobile phone can find the virtual network you just created.

6. Open Network Sharing Center-change the adapter settings, right-click the connection you have connected to intelnet (local connection or broadband connection)

Select properties, click share, select "allow other network users to connect to and from the Internet" option, select the last virtual network to be established from the drop-down list, and click OK.

If the following error occurs: a null error occurs when Internet connection shared access is started)

The Windows Firewall Service is not started. Win + R, enter services. msc, find the corresponding service, and start it.

Note: Make sure that your laptop's wireless network device has been turned on. Press FN + FX (X is different from your computer, and my name is F3)

Mobile phone

Choose "Settings"> "wireless and network"> "WLAN Settings"> "WLAN". After the check box is selected, a list of network connections is displayed in "WLAN Network" below, select the wireless network on your computer, connect to it, and enter your password!