When you use the system installation CD to directly install the system, the following error occurs: "Windows InstallationProgramWindows cannot be configured to run on the hardware of this computer. "As a result, the system cannot complete the installation.
The hard disk is SATA and requires driver boot.
Solution: installation steps:
1. Intel rapid storage technology driver sp58391
Http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex? Softwareitem = ob-108207-1 & CC = cn & DLC = ZH-Hans & lc = ZH-Hans & OS = 4063 & Product = 5329688 & sw_lang =
After the download, change the suffix to RAR and decompress it directly. Copy the sp58391 folder to the USB flash drive and insert the USB flash drive into the USB flash drive on the USB flash drive interface on the right side of the notebook,
2. Install Windows 7 normally. When installing to select a partition, click the "load driver" project to browse the sp58391/driver directory in the USB flash drive and load the driver. Then, install the system normally.
Note: You may also encounter an error. You must install the system when the power supply is available. The normal laptop will prompt that the operating system cannot be installed on the hard disk if there is no power in the super version, note.