How does the CPU shell be disconnected?

First of all, the CPU is a technical work, careless operation easily damage the CPU, please be cautious, the method introduced for reference only, we must be careful in dismantling.

How does the CPU shell take apart? To disassemble the CPU Shell detailed tutorial

1. Preparation work

2, this step with a knife when you must be careful to be patient, do not scratch the CPU cover and the following section, do not be afraid of no place to row, the CPU above and below a layer of gum, there is probably less than 1mm of the appearance of it, can accommodate the knife front. All four of them are carefully zoned, especially when the four corners are carefully drawn, the knife is easily scratched by the hand. into probably 1-1.5mm. Next

3, with the upper part of the tweezers carefully inserted as the top cover and the middle of the board below, do not be afraid of inserting a few, also don't be afraid of the tweezers hardness is not enough, to be careful upwards, pay attention not only to pry one side, four sides round, must pay attention to the curvature of the board below, should not force too big, generally this time can gently uncover the lid, Look at the picture

4, this time you can take off the lid, do not scratch or touch the inside of the electronic original, the CPU is very fragile, but also did not imagine so unbearable, we let go hand carefully can be done, thank you reader watch, the following several pictures are open skull, no time to ignore!