How to create an electric saw blade? PS: create a realistic electric saw blade-PS tutorial

How to create an electric saw blade? Many of my friends do not know how to operate it. In fact, it is not very difficult. the following small series will introduce PS to create realistic electric saw blades, I hope everyone will like to draw sketch of physical objects in our daily life. the following small series will introduce a method to create an electric saw blade. The process is very detailed, if you like it, come and learn it!

Method/step

Step 1: create a new 450*450 pixel white file ..

Step 2: Select "edit"-"preferences"-"reference line mesh and slice ......" Tool.

Step 3: adjust the grid spacing and subgrid settings. Click OK.

Step 4: create a new layer. Select the line tool.

Step 5: set parameters. Note that the size is 6 pixels.

Step 7: draw an arrow from the drawing board!

Step 8: return to the path panel and adjust the foreground color to black.

Step 9: click to fill with the foreground color! Press ctrl + c ". Copy.

Step 10: return to the layer, ctrl + v, and copy layer 1.

Step 2: press ctrl + t to quickly enable free transform.

Step 2: adjust the angle to 15 degrees. Click OK. In this way, we can create a circular image after repeated operations.

Step 2: Create a new layer. Create a circular selection area ..

Step 2: fill the selection area with black.

Step 2: Select-select all to load the entire layer to the constituency.

Step 2: Select merge copy.

Step 2: Enter the channel and create a new channel!

Step 2: Select "edit", "Select paste", and "paste!

Step 2: Because the white area in the channel represents the selection area, we need to turn the sawtooth into white. at this time, we select "image", "adjust", and "reverse!

Step 2: Select "filter", "Blur", and "Gaussian blur ". Adjust the parameters and click OK.

Step 2: Select "image" and "color level" to adjust the image edge. Set parameters and click OK.

Step 2: Select the elliptical tool and press alt + shift to create a circular selection area to remove the tip of the gear.

Step 2: Click "select"-"reverse" to select the outer part.

Step 2: press and hold the Delete key to Delete the tip.

Step 1: fill the background color with black again ,.

Step 2: Select the rotation twist in the filter.

Step 2: After adjusting the angle, click "OK.

Step 2: Return to the background layer in the layers panel.

Step 2: Let's make the metallic texture of the electric saw. Fill the background layer in gray.

Step 2: Change the foreground color and background color to white and black, and then select the cloud tool. Effect.

Step 2: Select the "filter" to add the color. Set parameters. Click OK.

Step 2: Select filter-Blur-radial blur, adjust the parameters, and click OK.

Step 2: extract the model we created in the channel, Press ctrl, and then click the last one under the Channel.

Step 2: press the "reverse" key and then press Delete to Delete unnecessary parts.

Step 2: Select a small hole in the middle of the image and delete it. Effect.

Step 2: delete the background layer and then cancel the gridlines as needed.

Step 2: Select the fade-down tool and perform the final processing on the image ,.

The final effect is coming out!

At the end of the tutorial, the above is a realistic electrical saw blade tutorial for psproduction. I hope you will like it!