STEP1
:
the wireless icon in the upper-right corner of a stand-alone desktop, wireless network in an automatic search environment, as shown in the following figure.
STEP2
:
Click on "Open Network preferences" and go to the "Network preferences" screen, as shown in the following image.
STEP3
:
Select the settings you want
IP
the network card for the address (for example, the wireless card in this example). Select
Airport
, and then click Advanced to go to the
airport
Network Parameters Settings page. Select "
TCP/IP
" and go
to the
interface of the address set, as shown in the following figure.
STEP4
:
depending on your actual network usage, you can choose to manually configure
IP
or
DHCP
, and set the relevant parameters.
1.
Manually configure
the IP
: Open the "Configure
IPv4" drop-down box, select "Manual"to
manually specify IP
for the wireless network card Address and other parameters. For example:
IP
Address
:
192.168.1.90
Subnet Mask:
255.255.255.0
Router: can be filled in according to your network choice, in this case leave blank.
When you are finished, click OK to return to the network preferences interface, as shown in the following figure.
Click "Apply" to set the entry into effect.
2. DHCP
,
computer automatically obtain
IP
address and other network parameters. Go to the
AirPort
Network Parameter Settings page, select "
TCP/IP
", and go
to the
address settings screen, as shown in the following figure.
Select the Use
DHCP
", Setup is complete. Click OK to return to the Network Preferences page, as shown in the following figure.
Click "Apply" to make all settings effective.
