How to set the IP address of the computer and text detailed

2 Windows 2000/xp parameter settings:

Right-click the desktop Network Neighborhood → select "Properties" → "Local Area Connection" of the network card to select "Properties" → "general" → "Internet Protocol (TCP/IP)" To view its properties:

If the router is the default setting, then the host network parameter is set to:

ip:192.168.1.x (2-254)

Mask: 255.255.255.0

Gateway: 192.168.1.1

DNS: Fill in the local DNS address, if not clear, consult your local service provider.

(IP addresses can also be set to be automatically obtained, DNS recommends manual designation)

(3)Windows Vista parameter settings:

Right-click the desktop Network Neighborhood → select "Properties" → select "Manage network Connections" in the network management sidebar.

select properties → general → Internet Protocol version 4 (TCP/IP) for the corresponding "Local Area Connection" of the network card to view its properties:

If the router is the default setting, then the host network parameter is set to:

ip:192.168.1.x (2-254)

Mask: 255.255.255.0

Gateway: 192.168.1.1

DNS: Fill in the local DNS address, if not clear, consult your local service provider.

 

( 4 ) Windows7 , Windows8 parameter settings:

Right-click the desktop Network Places-> Select Properties, open the Networking Share Center, and select Change adapter settings in the Network management sidebar:

Select "Properties" → "Network" → "Internet Protocol version 4 (TCP/IPV4)" in the corresponding "Local Area Connection" of the network card, and click "Properties":

If the router is the default setting, then the host network parameter is set to:

ip:192.168.1.x (2-254)

Mask: 255.255.255.0

Gateway: 192.168.1.1

DNS: Fill in the local DNS address, if not clear, consult your local service provider.

The DNS server is provided by the local network service provider, if not clear, please consult the service provider.

( 5 ) Apple IOS system parameter settings:

go to Apple Desktop, select Desktop Icon"System Preferences". In the pop-up page, select"Network". Eject the Network Connection Settings page,as shown in the following figure,"location"Select"automatically","Show"Select"AirPort", select"TCP/IP", configureIPV4Select"Manual",DNS: Fill in localDNSaddress, if not clear, please consult your local service provider.

( 6 ) Linux system parameter settings:

Open Linux system interface, select "System"-"Administration"-"network" , enter the following interface. Double-click the red area "Active" to Configure the IP address

in the "Statically set IP address" entered in IP addresses, masks, and gateways. After the input completes click OK in "Network Configuration" Select DNS to configure, (Fill in the local DNS address, if not clear, please consult your local service provider.) )