1, the first computer to remove all peripherals, such as mouse keyboard and so on, the network cable will be unplugged, power off. The screen is placed downward
2, at this time you can see two screws on both sides of the hole, where we use the Phillips screwdriver place, the screws inside completely twisted open, we must ensure that the full twist, or when the opening of the box may damage the chassis.
3, in one machine base in the middle of a Wang, in the screw completely twist open the case, forcibly press this Wang, the lower part of the chassis will bounce a little bit.
4, the lower part of the chassis will be a little bounce, here we use prepared hard card into the opening of the gap, to row. will open a little more, and then with both hands forced to break apart, you can take down the back cover.
5, to the next cover of the whole machine is this way, 1 is the optical drive screws, 2 is the motherboard screws, removed here can see memory, 3 is hard drive screws
6, deal with the problem, after the lid installed, Ann, you should pay attention to all the Wang before the screw, or it will probably screw on the chassis will have gaps, not beautiful.