We all know that the computer's time is maintained by a battery power supply, and the accuracy is poor, often when you are inaccurate. The NTP server, a public network time server released on the Internet, can automatically and periodically synchronize the standard time of the local machine. Depending on the default Windows or NIST time server synchronization time in the Windows system, there are always access congestion, large time delay (low synchronization accuracy) and other factors. Now, China's national time service center has released a time server address. You can use your own standard time! Method 1: Use the built-in time synchronization function Take the Vista operating system as an example (the same as WINXP ). Click the time at the bottom of the system tray and click "change date and time settings" in the pop-up window. In the "Date and Time" dialog box, select the "Internet time" tab, click the "change settings" button to build and optimize Liaocheng network's professional website. The "Internet time settings" dialog box is displayed. In the server address bar, enter the IP address of the National Time Service Center Server: 210.72.145.44. Click "Update Now". After synchronization is complete, click "OK" to exit and OK. Method 2: Modify the Registry to improve time synchronization accuracy Because the default time interval of the system is 7 days, we cannot choose it freely, which greatly compromises the flexibility of this function. In fact, we can also manually modify its automatic synchronization interval by modifying the Registry to improve synchronization accuracy. The following uses the Vista system as an example (the same as WINXP ). 1. Enter "Regedit" under "start"> "run" (or press win + r) to go to the Registry Editor. 2. expand the [HKEY_LOCAL_MACHINE/system/CurrentControlSet/services/w32time/parameters] branch, double-click ntpserver to change the key value to the IP address of the National Time Service Center Server: 210.72.145.44, and click "OK" to save the configuration. (Note: If method 1 has been used, this step can be omitted) 3. Expand [HKEY_LOCAL_MACHINE/system/CurrentControlSet/services/w32time/timeproviders/ntpc Lient] branch, double-click the specialpollinterval key value, and select "base bar" in the dialog box to "decimal, the number displayed in the input box is the automatic time interval (in seconds). For example, the default 604800 value is 7 (days) × 24 (hours) × 60 (minutes) calculated in 60 seconds. Set the time synchronization period (recommended to set to 900 = 15 minutes, 3600 = 1 hour, 86400 = 24 hours), fill in the dialog box, and click OK to save the closing dialog box.
|