Mobile USB disk running Android System production tutorial

U disk running Android X86 system, is the Android x86 loaded into the U disk, and then from the U disk Boot computer (similar to Windows PE), you can run on the U disk and experience the Android X86 system.

Mobile USB disk running Android System production tutorial

Advantages:

1, portability good, go where to use, carry, in addition to the current mainstream U disk speed and interface speed enough to run Androidx86 system.

2, installation is extremely simple, only need to do a U disk mirror, and at the start of the selection of the boot as a U disk can experience the Androidx86 system.

3, low cost, do not need to use the original system in the hard drive, all operations are carried out in the U disk.

4, NO risk: Android system temporarily support the X86 architecture is not perfect, such as direct installation, after the failure to install back to the original system more cumbersome, with a U disk installation even failure, lattice off the U disk can be, the computer hard drive is not affected.

5, convenient detection, fast detection of the operation of the ANDROIDX86 system and computer hardware compatibility, can be debugged and then installed to the hard disk, to avoid blind installation.

Tutorial:

The first step, ready to work, need a U disk, and download a good two of the following software:

1.1, make a U disk to start with the UltraISO

Download Address: http://www.androidx86.net/thread-185-1-1.html

1.2, corresponding Androidx86 system mirrors (ISO format)

Download Address: http://www.androidx86.net/forum-38-1.html

The second step, the system to do an Android launch U disk

2.1, insert a U disk into the computer, and then open the UltraISO software, the interface is as follows:

UltraISO Main interface

2.2, use UltraISO to open the installation image we need to write to U disk. The action is: Locate the menu bar, select the file-> open, and select the mirror you want.

Open UltraISO

Select the Mirror you want

Write mirrored file to u disk

2.3, after the completion of the mirror loading, we will be ready to write the mirror to the U disk, the traditional copy and paste can only copy the data to the U disk and can not create a boot file, so we need to use UltraISO dedicated image writing function.

Mirror loading complete