First, the problem description:
There is a PC gigabyte motherboard, when installing the system prompts the following questions:
************************************************
The installer identifies the following mass storage devices on the computer:
. No
. Specify additional SCSI adapters, CD-ROM drives, or special disk controllers for Windows, including those that are available from the mass storage device manufacturer for floppy support, press S
If you do not have a drive floppy disk for a mass storage device provided by your manufacturer, or you do not want to use a mass storage device provided by another manufacturer, press ENTER
If you press ENTER here, the next step is to end the installation directly, and if you select S,
That's it:
You have specified a different SCSI adapter, CD-ROM drive, or special disk controller for use with Windows:
. Select one from the following list
. Go back to the previous screen
*dell PERC 2/3 RAID controller
*dell PERC 2/3 RAID controller (Gatling)
* Others (floppy disk required by hardware manufacturer)
************************************************
Second, the problem of the solution
1, the problem of hard disk or system
Think it is the previous soft raid impact, change the hard disk, or so, it is not the problem of hard disk. It must be the motherboard setup problem. The last send should be motherboard HDD mode is not correct: drive compatibility mode! 2003 SATA HDD not recognized! SATA drivers need to be loaded. I'll take a trip. All right, what a toss. Change the hard drive mode: Change to IDE.
2, install Windows Server R2 can be installed properly, it is estimated that the driver has been integrated.
This article is from the "Flying Pig" blog, please be sure to keep this source http://thinkpig007.blog.51cto.com/971471/1568564
Prompt when you install Windows Server 2003 and SP1: Setup identifies the following mass storage devices on your computer