Start the network and boot the computer's ghost to restore

① Premise 1: The computer has the LAN boot function, which can be enabled from the network in the BIOS.

② Premise 2: there is a corresponding server (for windows2003, IP address for 210.34.63.132)and service-Side Software tftp32.exe, ghostserver v8.2.exe)

③ Procedure:

Install the software tftp32.exeon windows, and enable tftp32.exe.

There are the following instructions: Current Directory :( automatically fill in the complete target address of tftp32.exe)

Server interfaces: 210.34.63.132

Then, configure the DCHP Server tab of tftp32.exe:

IP pool sarting address: (the starting IP address to be allocated to the network boot server) 210.34.63.20.

Size of pool: (maximum number of clients) 255

Boot file: (The Remote Boot pxeboot file named bootmenu.exe

Wins/DNS server: 0.0.0.0

Default router: 0.0.0.0

Mask: (subnet mask) 255.255.255.0

Domain Name:

Additional option: 0

After completing the preceding settings, click Save to save the settings.

④ Start the instance on the machine that needs to be remotely started and select start from Network

Then, the IP address is automatically obtained, which is assumed to be 210.34.63.small,

Select a single partition, and then select the drive letter. Press enter to send a signal to the ghost service machine.

Then, the information of the client 210.34.63.20.will be obtained under the ghostserver v8.2.exe interface.

Set the session name of ghostserver v8.2.exe to ABC.

The image file browses the specified gho file or other files.

Then, send the data to the client. The client automatically receives the data and overwrites the gho file on the server to the specified client drive to restore the ghost.