Ten more tricks to get your computer started

Ten more tricks to get your computer started

Too slow computer startup is the common heart of every computer fan, so that the computer started faster is the common aspiration of everyone, I in the process of using the computer summed up the speed of the computer to speed up the "XV-style", and you share.

　　First,the BIOS optimization settings

On the first page of the BIOS setup we enter the XP system to download the "Advanced BIOS features" option, move the cursor to the "Frist Boot Device" option, press "PageUp" and "PageDown" to make a selection, the default value is " Floppy ", this means that the system will read the boot information from the floppy drive at startup, which will increase the startup time of the machine and reduce the life of the floppy drive. So we're going to choose "hdd-0" to boot directly from the hard drive so that it starts up for several seconds. Also, for "above 1mbmemorytest" in the BIOS setup, "Disabled" is recommended, and the "quickpoweronselftest" option is enabled.

The setting in "Advanced chipset features" has a great impact on the speed of the machine, please pay attention to it. Change "bank 0/1 DRAM Timing" from "8ns/10ns" to "fast" or "Turbo". "Turbo" faster than "fast", but not too stable, it is recommended to choose "Fast". If the memory quality is good can choose "Turbo" to try, instability can be changed back to "fast."

For memory-quality memory chips, it is recommended that you set the "SDRAM CAS latency" option to "2", which speeds up the speed OH.

Newer motherboards support agp4x, if your video card also support agp4x, then the "Agp-4xmode" in the activation, that is, "enabled", this will better play the ability of the graphics card, speed up the system boot speed.

　　Second, start the DMA mode, improve the hard drive speed

The highest transmission rate for hard drives using UDMA/33, 66, 100 technology is 33mb/s, 66MB/S, 100mb/s, in theory, the IDE hard drive (this is the PIO mode4 system Download mode, the transfer rate is 16.6mb/ s) 3~6 times the transfer rate, but in Windows default settings, DMA is disabled, so we have to turn it on.

To do this, open the control panel → system → Device Manager window, expand the disk Drives branch, double-click the icon for the UDMA hard disk, go to "properties → settings → options", "√" in front of the "DMA" entry, and then press OK to close all dialog boxes and restart the computer.

Third, remove the Windows boot flag

First you have to open "start" → "settings" → "Binder options" and check "Show All Files" from the "Advanced Settings" list box in the "View" tab. Then open the C drive, find Msdos.sys this file, and cancel its "read-only" property, open it, under the "option" paragraph, plus a line of statements: logo=0, so that the Windows boot pattern will not be loaded run, boot time can also be shortened by 3 seconds.

　　Iv. Optimizing the "start" group

Computer Beginners Love to try out a variety of software, not long and delete it, but often for some inexplicable reason, these software will also reside in the "Startup" project (especially when using some D version of software), Windows startup will be wasted a lot of time. To solve this problem, it is very simple, you can open "start" → "Run", in the dialog box that appears in the "Open" column, select Enter "msconfig", and then click "OK", will bring up the "System Configuration Utility", click on the "Startup" tab, will not load the Startup group before the program "√ "Get rid of it." As a result, the startup time can be reduced by at least 10 seconds.

　　Five, the collation, the optimization of the registration form

After Windows starts up, the system reads the information in the registration table and temporarily registers it in RAM (memory), which is spent most of the time on Windows. Therefore, it is necessary to tidy up and optimize the registration table. For registry optimizations, you can use software such as Windows Optimizer master. To the Windows Optimizer, click "Registration information cleanup" → "scan", the software will automatically clean up the registry for you, after the scan, a menu will pop up to let you choose whether to back up the registry, it is recommended to select a backup, and then click "Clear".

　　Vi. Regular Maintenance Systems

If you install too many games, too many apps, and too much old data in your system, your computer will run slower and faster, and the boot time is getting longer. Therefore, it is best to do a complete maintenance of the computer every time. Click "Start" → "programs" → "Accessories" → "System Tools" → "Maintenance Wizard" and then click the "OK" button to perform a full maintenance of your computer, which will keep your computer in top condition. For a hard disk, it is best to do a "defrag" every 2 weeks, which will significantly speed up the program startup, click on "System Tools" → "Disk Defragmenter program". Note that the disk on which the system resides when defragmenting the disks must be organized to really speed up the Windows boot order.

　　Vii. expansion of virtual memory capacity

If your hard drive is large enough, please open "system" in " computer company XP system download Control Panel", open "virtual memory" in "Performance" option, select the second item: User set virtual memory settings, point to a less used hard disk, and the maximum and minimum values are set to a fixed value, the size of the physical memory of about twice times. In this way, virtual memory in the use of hard disk, you do not have to accommodate its large and small differences, and the fixed space as virtual memory, speed up access. Virtual memory settings are best done after disk defragmentation, so that virtual memory is not in a contiguous, non-fragmented file space, and can play a better role.

Eight, remove the "wallpaper", "screen protection" and other fancy settings

These settings, which take up system resources, also severely affect the startup order of Windows. Remove them by clicking the right mouse button in the blank of the desktop, selecting "Properties" in the popup menu, selecting the "Background" and "Screensaver" tabs in the pop-up dialog, and setting "wallpaper" and "screen saver" to "none".

　　Ix. Deletion of Autoexec.bat and Config.sys

The system installs the Autoexec.bat and the Config.sys two files under the packing directory, Windows already did not need them, can safely remove them, this can speed up the Windows startup speed.

　　10 . Streamline *.ini files, especially the contents of System.ini and Win.ini

The Ghost XP SP3 many drivers and font files are loaded in the System.ini [boot] and [386enh] subsections, which is the clear focus. In particular, it is important to note that the shell=explorer.exe of the [boot] field is the Trojan's favorite hidden load, and the Trojans usually turn that sentence into this: shell=explorer.exe File.exe, note that the file.exe here is the Trojan server program! With the Trojan then load run not only to the system security threat, the computer started also a lot slower; The program that is loaded after "run" and "load" in the Win.ini, not every boot must run, can be temporarily cleared, and then click to run later. This will reduce the number of files that Windows calls when booting up, and it will naturally be much faster.

Ten more tricks to get your computer started