The solution of slow computer boot speed 02

First, optimize the computer with the optimization master, open Optimization master-System optimization-boot speed optimization-start dwell time, select "Direct Access".

Second, dust, clean up the disk and defragment the disk.
1, open the chassis dust, all the connections are plugged in firmly.
2. In My Computer window, right-click the drive letter you want to clean-"properties"-"clean disk"-tick the file you want to delete-ok-yes.
3. Clean up the registry and junk files with the Master or Super Bunny.
4, defragment disk--start--All Programs--accessories--System Tools--Disk Defragmenter--Select c--analysis--defragmentation.

Third, the hard disk, optical drive jumpers are located in the main disk location (master), hard disk with IDE1, optical drive with IDE2. The hard drive (the same port) should use a 80-core data cable.

Four, optimize the BIOS settings.
1, into the BIOS to change the default settings to optimize settings.
2. Close the floppy drive.
3. Turn off the floppy drive detection function.
4. Open the Quick Start self-test function
5. Set the hard drive as the first boot.

Five, optimize the computer settings.
1. Disable the unused IDE channel. Right-click on "My Computer-Properties"--"hardware"-"Device Manager", where "IDE Ata/pata Controller" is opened and then enter the primary and secondary IDE channels respectively, select "Advanced Settings", set "device Type" to "none", and set "transfer Mode" to "DMA (if available").
2. On desktop My Computer-Properties-advanced-Startup and failback-Remove the two check-OK under "Default operating System".
3. Close some startup programs. Start-run-enter msconfig-OK-in the System Configuration Utility window Click "Start"-Start, in addition to the input technology (CTFMON), anti-virus software, the general program can be turned off (uncheck).
4, disable the redundant services. Right-click My Computer-manage-services and applications-services, and in the right pane, set the unwanted service to Disabled or manual.
5, the desktop, screensaver set to No, desktop icons not more than 10.
6, reduce the boot disk scan wait time, start → run, type: chkntfs/t:0, OK.

Six, set a fixed value for the IP address.

Seven, optimize the installation of anti-virus software.

Viii. Modify the registry.
1. Speed up the boot and shut down the machine
In [Start]-->[run]--> type [Regedit]-->[hkey_current_user]-->[control panel]-->[desktop], string value [ Hungapptimeout] is changed to [200] to change the value data of the string value [Waittokillapptimeout] to 1000. In addition in [hkey_local_machine]-->[system]-- >[currentcontrolset]-->[control], change the value data of the string value [Hungapptimeout] to [200], and the string value [WaitToKillServiceTimeout] The numeric data changes 1000.
2, speed up the pre-reading ability to improve the boot speed
In [Start]-->[run]--> type [regedit]-->[hkey_local_machine]-->[system]-->[currentcontrolset]-->[ Control]-->[sessionmanager]-->[memorymanagement], in the [Prefetchparameters] right window, change [enableprefetcher] Value data as follows, It is recommended that you change the value data to 1 or 5.

Nine, using the above methods have no effect, then find a better system CD-ROM re-installation system.

The solution of slow computer boot speed 02