I'll teach you how to build hardware RAID1 guide

Now a lot of motherboards basically support raid, general motherboard common RAID support level for RAID0,RAID1 and RAID10, so the following content of the hardware RAID1 for the formation of the graphics and text description, OK, let's hurry to realize it.

We are still following the usual steps to assemble the server, insert the embedded power switch on the front of the chassis with a fine object, the chassis fan updating, and the monitor is realistic for two Xeon 3.0 processor parameters and http://www.aliyun.com/zixun/ Aggregation/17968.html "> Memory capacity, etc., identified correctly.

Insert power switch in front of chassis

Knock on the keyboard into the motherboard BIOS interface, to observe the CPU and motherboard temperature, the temperature of the two CPUs is 40 degrees, one is 33 degrees, very cool. Several other temperatures are the temperature of each chip on the motherboard, which is also very good.

Tapping the keyboard to enter the motherboard BIOS interface

Looking at the hard drive, two sata250g hard drives that have been connected to the data line are also hung up.

The sata250g hard drive of the data line also hangs well

To modify the motherboard RAID options, please see that the SATA RAID enable option is disabled, which is closed, when the motherboard does not have RAID enabled, and if the operating system is installed, the hard drive is recognized as a two 250G hard drive, as is the case with a hard disk on a regular PC machine.

Modify motherboard RAID Options