Winxp and redhat9 dual systems, startup Problems

Winxp and redhat9 dual systems, startup problems-general Linux technology-Linux technology and application information, the following is a detailed reading. A while ago, I suddenly wanted to try linux by chance, so I downloaded a redhat9 online. My machine was originally using winxp, now I divide the last partition on the hard disk into three areas: \ boot \ swap, and then start the installation. During the installation process, I basically use the default settings, everything went smoothly, and I didn't make a drive disk because I didn't have a soft drive!
After the installation is complete, three options are displayed during the boot, namely redhat linux (2.4.20-8smp), redhat linux-up (2.4.20-8), and winxp, is this normal?
Then I started to select the system to enter. First, I tried the first one. The following code is displayed:
Serial driver version 5.05c (2001-07-08) with many_ports multiport ready _irq serial_pci isapnp enabled.
Ttys0 at 0x03f8 (irq = 4) is a 16550A
Ttys1 at 0x02f8 (irq = 3) is a 16550A
Real time clock driver v1.10e
Then there will be no changes, and there will be no wait for a long time, and the hot start will not be easy!
After cold start, I tried the second option and the following code is displayed:
Code: ff 50 10 eb d0 eb 0d 90 90 90 90 90 90 90 90 90 90 90
<0> kernel pamic: attempted to kill init! (In this process, the Cap lock and scroll lock lights are flashing all the time)
The following code appears after a while
<3> pc-keyb: controller jammed (0x15)
Then it will not start!


Which Eldest Brother can help me solve this problem! I have installed it many times and it has always been like this. You can go to the XP system !!!!