Router>enrouter#config tenter configuration commands, one per line. End with Cntl/z.router (config) #int f0/ 0Router (config-if) #no shut %link-5-changed:interface fastethernet0/0, CHANGED state to up % Lineproto-5-updown:line protocol on Interface fastethernet0/0, changed state to Up router (config-if) #ip add 192.168 .0.1 255.255.255.0Router (config-if) #do ping 192.168.0.2 type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.0.2, timeout is 2 seconds:.!!!! Success rate is percent (4/5), round-trip Min/avg/max = 5/5/7 ms router#sh flash system Flash directory:file& nbsp length name/status 3 5571584 c2600-i-mz.122-28.bin 2 28282 sigdef-category.xml 1 227537 sigdef-default.xml[5827403 bytes used, 58188981 available, 64016384 total]63488k bytes of processor board System Flash (read/write) router#copy Flash TFTPSO Urce filename []? C2600-i-mz.122-28.binaddress or name of remote host []? 192.168.0.2Destination filename [c2600-i-mz.122-28.bin]? writing C2600-i-mz.122-28.bin ...!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!! [OK-5571584 bytes] 5571584 bytes copied in 0.655 secs (8506000 bytes/sec) router#
From for notes (Wiz)
011 Router Backup
