2 wireless routers how to connect

Http://jingyan.baidu.com/article/e75057f282f4aeebc91a89eb.html

While wireless networks have become the preferred solution for families and small and medium-sized enterprises, the attenuation of wireless signals is severe due to the fact that the buildings are mostly reinforced concrete structures and the structure is complex and diverse. So when using a wireless AP for wireless network coverage, there will be a signal difference, data transmission rate does not reach the user needs, and even there is a signal blind spot problem. In order to increase the coverage of the wireless network, increase the long-range wireless transmission rate, so that the distance can easily and quickly use wireless to surf the internet, so that we need to use the bridge or WDS function of our wireless router.

Baidu Experience: jingyan.baidu.com Tools/raw Materials

Here is an example of Tp-link wireless router, so choose two Tp-link wireless routers.
Baidu Experience: Jingyan.baidu.com method/Step 1

First set up a wireless router to connect to the network, set this router to B.

Log in to the wireless Router B management interface, set the "SSID ", " channel " in the wireless settings - basic Settings , as shown in figure: Step Reading 2

To set the wireless signal encryption information in wireless settings-Wireless security settings Step Read 3

Records the SSID, channel , and encryption settings information After wireless router B is set up, which needs to be applied in the subsequent configuration of the wireless router A and C. 4

Another setting for wireless router A.

Modify the LAN port IP address. In the network parameters-lan port settings, modify the IP address and the B router is different (prevent IP address conflict), such as 192.168.1.2, save, the router will automatically restart. Step Reading 5

enable the WDS feature . Once the reboot is complete, use the changed LAN port IP address to log in to wireless router a again and check "turn on WDS" in the Wireless Settings- basic settings. Step Reading 6

WDS settings. Click "Scan" to search around for wireless signals. Step Reading 7

Select the B router SSID in the list of scanned signals, as shown in Tp-link_841_b, click "Connect". Step Reading 8

Set the channel to be the same as the B router channel. Step Reading 9

Set the encryption information to the same as the B router, save. Step Reading 10

Shut down the DHCP server. In the DHCP server, select "Do not enable", save, and restart the router. Step Reading 11

Wireless Router A is configured to complete. At this point, wireless router A and wireless router B have successfully established WDS.