64-bit Win7 flagship computer boot appears "No floppy disk in drive" How to handle

1, if the computer has a floppy drive appear in such cases, because the floppy drive was used when the computer was last shut down, but the software was removed directly from the system window, so every time I called my PC, I was prompted to insert the floppy drive, and the solution was to insert a floppy disk (without the floppy drive and put the CD into the CD drive) Then casually click inside the content, or copy a file in, and so on after the copy is finished, and then close My computer and other windows, and then remove the floppy disk, restart the computer, problem solving.

2, if the computer does not exist floppy drive has enabled the software will also cause this situation, simply disable the floppy drive. The method is as follows:

1 in the boot, press the DEL into the BIOS interface, select: STANDARD CMOS FEATURES, and then the inside of the subkeys as follows set:

DRIVE A: Set to None

DRIVE B: Set to None

2 after the setup is completed, press F10 to save and enter "Y" to return.

3, in the BIOS set the optical drive for the first boot device Insert system installation disk press R to select "Repair Installation" can be.

4, if there is a failure, on the boot press F8 into the Advanced options interface, select "The last correct configuration", enter the repair to try, repair completed after the restart, into the normal mode.

5, or with the system from the System Restore, restore to you do not appear this time of failure to repair (if normal mode recovery fails, you can enter Safe mode using System Restore).

6, in the end really not, you can only reload the system.

Note : More wonderful tutorials Please pay attention to the triple computer tutorial section, triple Computer office group: 189034526 welcome you to join