A brief analysis of the steps of finite element analysis after UG modeling

A brief analysis of the steps of FEM analysis after UG modeling. Many netizens who are learning UG This software have been discussing a problem recently, that is: UG how to carry on finite element analysis. To solve this problem, we need to first understand what is UG finite element analysis. And online on the UG finite element analysis of the tutorial is quite a lot of, but, small set summed up the law after found that the UG finite element analysis of the steps can not be separated from the 8 steps, the following, take a look at today's UG modeling after the finite element analysis of the steps to analyze!

Finite element analysis of UG

Recommended: ug4.0 software download

What is ug finite element analysis?

FEA (fea,finite element Analysis) simulates the real physical system (geometry and load conditions) by means of mathematical approximation. By using a simple and interacting element, i.e. a unit, a finite number of unknowns can be used to approximate a real system with an infinite amount of unknown quantities.

After the UG modeling finite element Analysis step:

1, enter the structure Analysis module (UG4.0 is the design simulation, need to install FEA software);

2, the choice of analytical solution (3.0 structure P.E, can be used);

3. Add load;

4, plus constraints (fixed constraint preferably one);

5, the assignment material;

6. Grid-Grid;

7, model check;

8, solve the calculation.

After the solution into the navigator to see result, you can see the displacement (displacement), stress (STRSS), strain (strain), such as the cloud, other post processing does not introduce.