First, the BIOS optimization settings
On the first page of the BIOS setup we go to the "Advanced BIOS features" option, move the cursor to the "Frist Boot Device" option, press "PageUp" and "PageDown" to choose, the default value is "floppy", This means that the system will first read the boot information from the floppy drive, which will increase the startup time of the machine and shorten the life of the floppy drive. So we're going to choose "hdd-0" to boot directly from the hard drive, so it starts up for several seconds. In addition, for the "above 1mbmemorytest" recommended in the BIOS setup, select "Disabled" for the "Quickpoweronselftest" recommended selection enabled.
In the "Advanced chipset features" in the setting of the machine to accelerate the impact of very large, please pay more attention. Change the "bank 0/1 DRAM Timing" from "8ns/10ns" to "fast" or "Turbo". "Turbo" faster than "fast", but not too stable, recommended "fast". If the memory quality is good can choose "Turbo" try, instability can be changed back to "fast".
It is recommended that the memory-quality memory bar be set to "2" in the SDRAM CAS latency option, which can speed up.
Newer motherboards support agp4x, if your video card also support agp4x, then the "Agp-4xmode" in the activation, that is, "enabled", this will better play the ability of the graphics card, speed up the system start speed.
Second, start the DMA mode, improve the speed of hard disk
Using UDMA/33, 66, 100 the highest transmission speed of the hard disk is 33mb/s, 66mb/s, 100mb/s, in theory, the IDE hard disk (this is the PIO MODE4 mode, its transmission rate is 16.6mb/s) transmission rate of 3~6 times, But in the default settings in Windows, DMA is disabled, so we have to turn it on.
The specific methods are: Open the control panel → system → Device Manager window, expand the disk drive branch, double-click the UDMA hard drive icon, go to properties → settings → options, "√" in front of the "DMA" item, and then press OK to close all dialog boxes and restart the computer.
Third, remove the boot flag of windows
First you want to open "start" → "settings" → "binder options", from the "View" tab in the Advanced Settings list box, check "Show All Files." Then open the C disk, find Msdos.sys this file, and cancel its "read-only" attribute, open it, under the "option" paragraph, plus a line of statements: logo=0, so that Windows boot pattern will not be loaded run, boot time can also be shortened by 3 seconds.
Iv. Optimizing the "startup" group
Computer Beginners love to experiment with software and remove it for as long as they can, but often for some inexplicable reason, the software will also reside in the startup project (especially when using some version D software), which will waste a lot of time when Windows starts. To solve this problem, it is very simple, you can open the "start" → "Run", in the dialog box that appears, select Enter "msconfig" in the Open column, and then click "OK", the System Configuration Utility will be called up, click on the "Startup" tab, and the "√" in front of the program will not load the startup group. "Get rid of it." In this way, you can shorten the startup time by at least 10 seconds.
V. Organize and optimize the registration form
When Windows starts up, the system reads the relevant data in the registry and is temporarily stored in RAM (memory), which is spent most of the time Windows is powered on. Therefore, it is necessary to organize and optimize the registration form. For the optimization of the registry, you can use software such as Windows Optimizer master. To Windows Optimization Master, click on "Registration information cleaning" → "scan", the software will automatically clean the registry for you in the garbage, after the scan is over, will pop up a menu to let you choose whether to back up the registry, recommended to select Backup, Backup and then click "Clear" can be.
Note : More wonderful tutorials Please pay attention to the triple computer tutorial section, triple Computer office group: 189034526 welcome you to join