About the way of office integrated wiring

For the way the company wiring, we have recently summed up the approach based on the experience of several experts, hoping to help you.

Method/Step

1, determine the number and location of information points, the number and location of information points to be considered from the future application, the future office or workshop, personnel work place, should use the nearest principle, and in the wiring or information point position, as far as possible with strong electricity separate, avoid interference

2, determine the cabinet or information points in the central location. Cabinet placement position is generally the last point of information points, the wiring, comprehensive consideration, the information focus of the best from saving wire, easy maintenance considerations, determined in the middle of the wiring area.

3, calculate wire length. In the beginning should take into account the required network cable and telephone line length, see more drawings, do know, and then combined with the scene, taking into account the corner, the actual path of the route, as well as the final reservation, calculate the approximate length of the line.

4, do a good job marking. The position of each information point should be indicated on the drawing before the actual operation begins. As well as the path, the most important thing is to be in the network cable and telephone line with a line or line mark at both ends of the line mark, the mark is best not easy to be erased, otherwise in the maintenance process in the future, resulting in the need to find the line, Or find the line after the actual situation does not match.

5, consider the longest line distance. This wiring occurs in the process of such problems, the company room to the second floor office area, the use of twisted pair of communication, it is well known that the quality of twisted-pair in the range of 100 meters, the communication rate can reach hundred trillion, this time, the room to the second floor length of about 90 meters, this length let me very worried, worry about the speed of less than hundred trillion.

6, laying the path. The ceiling of the office area is the active asbestos board, my personal idea is to save the network cable, want to go straight line in the ceiling, and the wall is not suitable for PVC pipe (oh, no experience AH), in consultation with experienced people, just know, the wall in the laying of PVC pipe, is to increase or maintain the line more convenient, And the ceiling is not running on the line, but also in order to maintain convenience, otherwise, in the maintenance, the ceiling like a spider web ... , and finally set, all lines in the wall through the straight straight to the corridor on both sides of the corridor on both sides of the summary, into the Office of the Regional Center of the cabinet.

7, the office area communication problems. Currently tentative in the future, after the use of two-tier switch and the computer room of the three-tier switch connected to the VLAN, so that the office area and other areas broadcast isolation, easy to maintain and manage.

8. Consideration of Conference Room. As the conference room is relatively large, there are echoes, it is recommended to use sound-absorbing materials more scientific to the conference room floor and wall processing, for future teleconference or network video conferencing to consider.