The XP mode is installed today, but in practice, it is found that the Virtual PC and VMWare share the network in a different way. VMware shares the network by simulating the network card, while virtual PC shares the network by binding the virtual PC emulated switch service to the existing network card. Therefore, you can share the network by adding a Microsoft loopback adapter soft Nic.
Microsoft loopback adapter (Microsoft loopback network interface) is similar to a virtual network interface card, which can be installed on a Windows system without a network interface card or used to test multiple host environments. I believe many itpro are quite familiar with this. However, the steps for manually installing the device after using the Add hardware wizard on Widnows 7 cannot be continued. does win 7 no longer support loopback adapter or manually adding devices? Actually, we can manually add a device or driver using the unzip hdwwiz.exe command. To do this, follow these steps:
1. Click the start icon, enter "hdwwiz" in Smart Search, and right-click the icon in the search result. ProgramRun as administrator.
2. Select "install hardware I manually selected from the list (advanced)" according to the operating system wizard )".
3. In the hardware list, select "network adapter ".
4. Select the Microsoft vendor and select Microsoft loopback adapter in the network adapter list on the right. Next, follow the Wizard to complete the installation.
Then, perform the following operations:
1. for networking in Virtual PC setting, select Microsoft loopback adapter.
2. Configure the local Microsoft loopback adapter and the Microsoft loopbak network connection IP address in the Virtual Machine System as the same network segment. For example, 192.168.1.12 and 255.255.255.0
5. Add hardware in the control panel directly in the XP system, and then repeat steps 2-4.