The iTV port can be used as a LAN port, but you need to confirm that the IPTV function is not enabled on the all-in-one machine. The confirmation method is as follows:
Enter the management address (192.168.1.1 by default) in the browser and log on to the management interface of the all-in-one machine. The all-in-one machine has two management interfaces:
Traditional interface
Click
IPTV
Set, Not checked
Enable
IPTV
Function,
Save. As shown in the following figure:
New interface
Log on to the all-in-one management page and click
IPTV
Set, Not checked
Enable
IPTV
Function,
Save. As shown in the following figure:
Note:: The New Territories all-in-one machine can also be found on the management page, click the home page
ITV
Status, Click
ChangeYou can directly disable the IPTV function on this page.
After the IPTV function is disabled, you can use the iTV port as the LAN port.
