ADSL with no line from the simple summary

For ADSL with no line from the Do not know if you are aware of this configuration process, so we also from the Internet for everyone to clean up the relevant information to help you understand the relevant content. Add a telephone and ADSL internet equipment, and many players encounter the same situation, all hope that through a dial-up device, to achieve multiple hosts sharing the Internet. Touch the hand, the existing equipment (front):P C Host 1 (including 1 network card), IBM R51 (including Intel Centrino Technology) 1, ADSL cat set 1 (Free network cable, power adapter).





, there are 3 ways to approach traditional sharing. The first is the least and the actual, but also the most cost-effective solution, in the PC mainframe, the purchase of the 2nd network card. 2 network card 1 Connection ADSL cat, 1 to connect my R51, through Windows XP in the "Network Neighborhood" option settings, complete the sharing scheme.





ADSL with wireless router second, purchase switch or hub, use network cable in parallel, sharing settings and 1th program the same. The 1 and 2nd programs will be implemented using a fixed network cable, R51 can not play mobile portability, but very economical. The last number 3rd idea, but also the most expensive, but can reflect the convenience of the trend of the wireless router, using R51 integrated Centrino technology, within the family more freedom.





However, not only the cost will be increased by more than 200 yuan, hardware and software configuration for manual requirements higher, with the challenge of the meaning. In the balance, the small series selected scheme 3, and experienced 2 days of the groping process, to achieve their own plans, the following will be a clear description of the process, personal experience in the details, hoping to solve problems for their friends.





Small series in charge of the capital city accessories and network equipment market reports, but the purchase location in Guangzhou, then you will encounter the business of the possibility of black price, how to avoid it? The baby is out. First, the price of goods to compare 3, through the difference can quickly understand the market products and brand status. Subsequently, the advisory package offer, not only can take into account the cost of upgrading, the main, or to obtain a lower price, throw away other accessories, can see the real price of the router.





through carefully selected, small series to buy the D-link di-624+ A, 290 yuan. The brand is in a mid-range position. Packaging labeled the operating software for the Chinese interface, quality assurance 1 years. The purchase process has gone through the process, the product affixed to the dealer's Sales quality label (identification of the purchase date), open receipts vouchers, take a dealer's business card. At this point, it is recommended to request or purchase a slightly longer 1 cable, for and R51 laptop cable connection.





Routers and switches, hubs the biggest difference is the body now, he can have his own IP, to achieve some of the server owned functions. And here, what we need is that it can dial the ADSL adapter to play the role of the host server. So, how to control and set up first? Refer to the manual is to solve the immediate method of one of the diameters, of course, also know the disease Touyi Play 800 free technical telephone. Small set Although the cable network operation is handy, but ADSL with wireless router is "Big girl on the sedan", so learn from the past experience, in accordance with the way of wired cloth network, the following network cable Connection:





connects the ADSL adapter and the wireless router to the WAN port. Afterwards, small set summed up the next experience, WAN is the most important step in the dialing link, all the dialing settings, are aimed at its launch. We need to use the router dial-up Internet, the main configuration of the unit is the WAN section, the Internet is vulnerable to the situation, the first thing to check is the WAN unit.





the PC host through the network cable to the wireless router LAN port, number 1-4 is arbitrary. Considering the R51, there will be wireless and wired two network adapters, so the debugging phase or the common PC cable part as the basis for a very adept. Then, configure the wireless section.





ensure that the ADSL adapter and the wireless router power are all turned on, the power led, and the connection port led, lit. Most products are in normal working condition the light is green. With the above wiring work done, we can start to configure the network formally.





reference ADSL with wireless router instructions, in the URL address column fill in: 192.168.0.1 (wireless router factory default IP). At this point, the router will eject the landing screen, enter the default username and password can go in. Then, click on the D-link Online Settings Wizard, and follow the steps to fill in the relevant content, of which there are 1 WAN settings. Content is 4 options similar to the type of dial-up connection using Windows XP:





we choose PPPoE here, this is the Dial-up protocol for ADSL adapters, and then, in the username and password column, fill in the user name and password required for dialing. Set the maximum idle time (the router will automatically disconnect the dial-up connection) and online (recommended: Online when manually online and with traffic) and select OK. After the configuration is complete, test the connection for failure, click on the "Online" button below the WAN content, wait for 5 seconds, if successful online, the IP address information will appear, and the fault status is 0.





Small series is not 1 times the success of sexual connection, to also be a blessing in disguise, a deeper understanding of the fault resolution. Dial D-link 8008296688 Technical Service telephone, turn artificial station. reported the network environment that I want to complete, and the problem of failure. The technician gives the plan, clears the system record, clicks "On-line" again, inspects whether has pado the word.





if not, make sure that your hardware environment is working properly, and that you have no problem with the username and password you are filling out. If it is not resolved, the wireless router will be restored to the factory state, hold down the reset button for 5 seconds, cut off the power 3 seconds or so. Small knitting luck compare decline, follow the procedure, can only try to restore the factory state this item.


because the reset button is placed inside the body inside, small made up to find a screwdriver more sharp things, hold down the 1-end time, and cut off the power. However, ADSL with the wireless router results still, many attempts to find that the original need to "live" click Reset, and then power off. Finally, the successful, online success.





so the rest of the ADSL with the wireless router steps how to solve it? First of all, let the PC to share the Internet, the first PC network card IP and DNS, such as the choice of automatic allocation, to teach routers to complete the allocation and domain name resolution function. Then, in the "Online Domain" property options, select the "Set up home or small office network" option, which will have the option to choose the way the Internet menu, click "Through other" can be. In IE, enter the domain name, login QQ to detect whether the network connection is normal.





then let the IBM R51 implementation of the connection, the notebook is a genuine SP2 with the Windows XP Professional Edition, the same is open the "online Domain" property options, which will appear "Wireless network connection" logo. The network tasks on the left have the "View available wireless Networks" option, where you can configure the details of your wireless network. By default, R51 automatically looks for the nearest wireless router and automatically connects the IP and DNS of its wireless adapter to automatic access and steps through the Internet.





The configuration of the wireless network is not much different from that of the Wired network, with 1 wireless routers supposedly capable of driving more than 40 wireless nodes nearby. In the ADSL collocation wireless router aspect, will involve the periphery network configuration. The small series also tried the relevant content, the feeling of Windows XP system is very user-friendly, you can set up network configuration information through the following steps, using U disk storage, in other wireless node installation configuration, U disk in the relevant documents will be recorded, unified induction network models related information, user data, adjusted up quite convenient.





2 Minor problems occurred during the IBM R51 connection:





Search for other wireless networks nearby, which means we need to configure security for our home routers. Such as: Modify login username, password, WAP file encryption, etc., to avoid resources for other people to obtain, use.





Landing "192.168.0.1" interface for a long time, 3-5 minutes, wireless network connection signal decline phenomenon, the signal fell to 11Mbps, exit and repair the connection, troubleshooting.





in the overall ADSL with wireless router debugging process, small series also walked a lot of long way, mainly on the WAN Port's lack of awareness. First of all, follow the previous steps to connect the hardware configuration, I hope that the PC direct dialing, and then R51 through the wireless module, the traditional 1-1 way to achieve. As a result, the PC cannot dial, and R51 cannot configure the shared unit through the wireless module.





ADSL with the wireless router, the ADSL adapter RJ45 line from the WAN down, connect LAN port, PC dial-up success. At this point, the router serves only as a switch and does not perform well. Network construction is not complete, wireless router DNS DHCP function handover to the PC, R51 notebook default network sharing has become a fixed RJ45-type network card, rather than wireless networking modules, debugging steps cumbersome. In view of the success of the above experience, the small series put forward 2 places that need extra attention:





If you do not use the routing feature, the ADSL adapter's RJ45 line is not connected to the WAN port, the LAN port should be connected, or the offline state will always be rendered.





after using network resources, if it is time to charge, be sure to enter the router control interface, the "online" status off. Initially "set maximum idle Time", you can set a small number, to achieve no flow, automatically shut down.