After the Cass is installed, the shortcut key of the CAD and the restoration method of the toolbar (including Ctrl + Z, copy, and paste)

After the Cass is installed, many shortcut keys cannot be used, such as Ctrl + C and CTRL + 1. the toolbar is also lost (for example, the layer II in cad208 is the one that controls the layer display ). It is inconvenient. You can modify ACAD by using common shortcut keys. PGP, but there is no way to implement the tool bar with Ctrl + C, CTRL + 1, etc. After a study, we found that the interface file to be changed to CAD can be restored. That is, modify Acad. Cui. You can refer to the interface file modification that comes with the original CAD to add the missing file. You can also use the Standard CAD Mode Custom. Cui file to modify it.

Let me talk about my method. I use ACAD that comes with CAD. the Cui file is copied and put in the system directory of the Cass and renamed as custom. cui, and then ACAD under the system directory of the Cass. attach this m in Cui. cui, and some invalid Content in this file is supplemented with Acad. cui. I did not check it carefully, but added the functions I wanted. But there is no simplified custom. there are repeated contents in the Cui and Cass interface files, mainly in the toolbar. This does not affect. After modification, open the Cass and delete the repeated toolbar. It will not affect the use of the tool anyway, but if it is perfect, we will remove the duplicates.

The following is my modified file. /Files/erqie/Cass. rar

If you want to download the SDK in a lazy way, unzip it to the system directory of the CASS installation directory.