AHCI driver Installation instructions for loading Q77 chipset under XP system

Failure phenomenon:

Host Q77 chipset motherboard, already installed XP system in IDE hard drive mode, want to instruct to manually load AHCI driver under Windows XP system

Solution:

Attention:

1. Verify that the user is currently in the BIOS in the hard drive mode is the IDE, if the first choice of AHCI mode will start a blue screen, must be successfully loaded with AHCI driver after the system to the BIOS in the IDE to the change to AHCI mode

2. This method does not guarantee the success of loading on non-standard operating systems, at the same time prompts users to backup data before operation, loading risk This program is not Microsoft official operation, not necessarily 100% successful

Steps:

1. With the user found this option in Device Manager, as shown in the figure selected;

2. Right mouse button to select this point to update the driver, and then pop-up this page, select "No, temporarily not";

3. Click "Next" and select "Install from list or specified location (advanced)";

4. Select "Do not search, I want to choose the driver to install", and then "next";

5. Click "Browse" and specify the AHCI drive storage path;

6. Find the "f6flpy-x86_11.2.1006" folder at this time, select "Iastor" (be sure not to choose the wrong!)

7. Select "Intel (R) 7 series/c216 chipset Family SATA AHCI Controller", then next, if the user is not found, recommend the user to pull down the scroll bar;

8. Then click "Finish".

9. Restart the host into the BIOS after the completion of the hard drive mode into AHCI, and then into the system to view the Device Manager, the hard disk name has changed, as shown in the picture, at this time has been completed under the system loading AHCI drive process.