Allow the WinXP system to self test and repair the hard drive every time it is powered on

The system will sometimes automatically detect and repair the hard drive when the computer is powered down unexpectedly:

Checking file system on C:

The type of the file system is FAT32.

One of your disks needs to is checked for consistency.

You may cancel the disk Check,ber It's strongly recommended that to you continue.

Windows would now check the disk.

Volume serial number is 2a1d-0905.

Windows is verifying files and folders ...

* * percent completed ...

This test takes about 10 minutes and then appears below

File and folder verification is complete.windows are verifying free spaces ...

* * percent completed ...

This is in the case of abnormal shutdown of the self-test, it will take more time, if it is normal to start self test, you can use the following actions:

1. If you want your computer to perform a test on every boot, restore the default settings. The method is to execute the following command: After CHKNTFS/D executes this command, the system automatically checks the partition table when it is powered on, and the disk scan is started if a problematic partition is encountered.

2, if you think that the disk is a problem or disk sorting work, you can periodically or irregularly using the system's own system tools to operate. The method is to start-All Programs-attachments-system tools.

3, if you want to repair or scan the disk you can open My computer right click on each partition-Properties-tools to check the collation and repair.

Now most of the users are pursuing the boot speed, even some friends even 1 seconds are not spared, so now very few people will choose to post the function of the hard disk, in fact, as long as we usually pay attention to computer operations, regular sorting disk is no problem, not only can save boot time, but also to make your hard drive better protection.