Application Guide: Step-by-step instructions on Broadband Router settings

At present, there are many users of broadband routers in China, and they are also widely used. Here we mainly introduce how to effectively set up broadband routers to make the network more smooth. Surfing the Internet makes it necessary for us to deal with the Broadband Router settings. However, during our use, we seldom look at it, even if the network is faulty.

Few believe that these faults are related to routers. In fact, a vro is the same as other network devices. When we set or maintain the router improperly, it may encounter various inexplicable faults. The most direct impact is the speed of our Internet access. In order to effectively improve internet access efficiency, we will provide you with some experience and skills in managing and maintaining Broadband Router settings, hoping to help you.

1. Correct Connection to ensure smooth connection

To make the configuration of a Broadband Router take effect, you must first ensure that the network lines connected to the router are in a smooth state, the first thing we need to do is to correctly connect the Broadband Router to the network. Under normal circumstances, we should use a twisted pair cable to connect the WAN port in the control panel of the Broadband Router with the ADSL Modem, and the telephone cable must be inserted into the Line port of the broadband cat, note that the twisted pair cables connecting the Broadband Router and the broadband cat must use a direct connection.

After the Broadband Router is connected to the network according to the above method, the Link signal of the corresponding lanport In the router control panel should be in the bright or blinking state. If the signal light is abnormal, it indicates that there is a problem with the line connection between the configuration of the Broadband Router and the lan network. At this time, you must re-check the connection line.

2. Set an account to ensure dial-up is successful

During the actual use of the Broadband Router settings, we often encounter the failure to successfully perform ADSL dialing, in most cases, we have not correctly set the automatic dialing parameters for the Broadband Router. In this case, we recommend that you repeat the following steps to set the dialing parameters for the Broadband Router.

First, run the IE browser program. Then, in the address bar of the IE browser window, enter the IP address set for the Broadband Router. The IP address can be found in the operation manual for the Broadband Router, the default address is 192.168.1.1. After you confirm that the IP address is entered correctly, click Enter. An Account Logon window is displayed in the IE browser window, enter the correct account and password in this window (this password can also be found in the operation manual of the Broadband Router settings), and then you can smoothly enter the Management window of the Broadband Router, click the "Network Parameters"/"WAN Port Settings" command in the menu bar of the window, and find the "WAN port connection type" option in the right pane of the interface, then, set this option parameter to "PPPoE", enter the user name and password of the dial-up Internet, save the preceding settings, and restart the Broadband Router settings, in this way, the automatic dial-up of the Broadband Router can be ensured.

3. Check DNS and open the webpage correctly

When we use a Broadband Router to dial up the Internet, we sometimes encounter a strange phenomenon that can use QQ but cannot open the webpage. This fault is usually caused by incorrect domain name resolution, we must re-check the DNS parameters set for the Broadband Router.

When checking whether the DNS parameters are correct, you also need to run the IE browser program, then enter the IP address set by the Broadband Router in the address bar of the IE browser window, and click the Enter key, enter the correct account password in the Account Logon window, and then you will be able to smoothly enter the Management window for Broadband Router settings, click "Network Parameters"/"DNS Service" commands in the menu bar, and check whether the DNS parameters are correctly set on the settings page that appears later.

Generally, we should use the DNS server IP address provided by the local ISP instead of the default DNS Server IP address of the vro. After the DNS parameters are modified correctly, save the settings, save the above modification settings and restart the Broadband Router configuration device. I believe this will solve the fault that cannot be opened on the web page. Of course, if the above efforts still show that QQ cannot be used to access the Internet, we recommend that you go to the local connection attribute settings window in the local computer system, select the "Internet Protocol" parameter, click "properties", and then on the "Internet Protocol property Settings" page, change the DNS server address used by the local Nic to the IP address of the DNS server provided by the local ISP, so that the failure of the web page cannot be completely solved.