I used to talk about using a floppy disk as the recovery disk of the startup ghost, but now how many people use Floopy, not long ago I bought a DVD-RW, it's a 16 × 16 pioneer. You can also engrave D9 and send 10 D5 images "). Well, it's still good to use pioneer (the system passes down ). No, it's still good to start with a CD. How can I recover a disk when the CD is started? Use the config. sys and autoexec. BAT files as before.
Config. sys
Device = himem. sys
Device = oakcdrom. sys/D: mscd001
Lastdrive = z
Autoexec. bat
Echo warning! This will destroy all of data on the first partation in your first HD!
Echo press any key to continue or Ctrl + C to stop
Pause
Mscdex. EXE/D: mscd001/L: Z
Ghost-clone, mode = pload, src = z:/system. gho: 1, DST = 1:1-Sure
Then burn with the DVD-ROM (BOOT) in Nero, remember to put the ghost and your backup file in.
If you have a CD-ROM recorder, there's no problem. You just need to back it up.
Ghost-clone, mode = pdump, src =, DST = D:/system. gho-Z9-split = 690-autoname
In this way, ghost backs up the first partition in a capacity unit of 6 90 MB to the system. gho, system.001, system.002.... and other files. I don't need to talk about it anymore.