Barcode Label Printer roll paper How to do

Barcode Label printer must be equipped with label paper and ribbon supplies, as long as the debugging is good, you can print out the perfect effect. Barcode Label Printer Thermal Printing There are two main, one is heat-sensitive paper color, which is often said heat-sensitive way; one is the transfer of ink, which is often said heat transfer mode.

There are a lot of barcode label paper required to be able to withstand the test of time, the text must be long-term preservation, long-term no variant, not because of contact with the solvent wear, can not fade, can not because of high temperature deformation and so on, it must be a special material of the barcode printing media and printing materials to ensure This is the general ink-jet printing technology can not be achieved, laser barcode printing can not be achieved, and the effect of the needle hit and the original design can not meet the requirements, so there is the emergence of thermal transfer technology. Bar Code label Printer label paper feed mechanism, whether it is flat-pressing mode, or suspension mode, are all used the same motor drive.

Many customers will encounter a variety of barcode label printer problems, such as the carbon belt wrinkling, printing is not clear and the label paper will appear roll paper and so on, the label paper appears the issue of how to solve:

Barcode Label printer appears the reason for the paper is that the label paper is not installed, the solution is as follows:

1. Remove the plastic panel in front of you and push it right in front of you.

2. Unscrew the screws on the left and right side, and remove the screws of the 2 fixed motors on the right iron sheet.

3. Take off the motor, find 2 gears, remove the E-buckle, the green Kari on the left to remove the e-buckle, take off about 2 stopper

4. Take out the label printer roller, take off the paper, then wipe it with alcohol, and then put it back in the steps.