Basic _EXP3 of information security system design

Beijing Institute of Electronic Technology (BESTI)
Real Inspection report
Course: Fundamentals of information Security system design	Class: 1353	Name: Wu Ziyi, Zheng Wei
School Number: 20135313, 20135322	Instructor: Lou Jia Peng	Date of experiment: November 25, 2015
Compulsory/elective: compulsory	Experiment Number: EXP3	Experimental time: 15:30-18:00
Experiment name: Migration of Exp3_ real-time system
Purpose and requirements of the experiment	1. Install Ads
	2, install Giveio Drive
	3. Install JTAG Driver
	4, test the basic installation is correct
Laboratory equipment	1. One computer from Lenovo
	2, ARM experiment box one

Partner Blog Link: 20135313 Wu Ziyi http://www.cnblogs.com/paperfish/Configure the lab environment:

1. Install Ads (install files in 00-ads1.2 directory, crack method 00-ads1.2\crack directory)

2. Install the Giveio driver (installation file in the 01-giveio directory)

Copy the entire Giveio directory to the C:\WINDOWS and copy the Giveio.sys file under the directory to c:/windows/system32/drivers.

In Control Panel, choose Add Hardware > Next > select-yes i have connected this hardware > Next > Check-Add New Hardware Device > Next > Check Install I manually select hardware from List > Next > select-Show All devices > Select-Install from disk-browse, specify drive as C:\WINDOWS\GIVEIO\giveio.inf file, click OK, install driver

3. Install the JTAG driver (install files in the 02-uarmjtag2.0 directory)

4. Configure HyperTerminal: Baud rate is 115200, data bit 8, no parity check, stop bit 1, no data flow control.

5. Test the basic installation is correct, refer to document "03-Test document. pdf", test program in 04-test directory

1	在pc机中“开始”、“运行”，输入虚拟机的ip。\\192.168.0.234，输入用户名bc，密码123456。然后就可以访问虚拟机的文件。再把所需文件解压缩拷贝到共享文件夹bc中。

123456

首先运行ADS.1.2集成开发环境。Click File->open Select the project file Exp3/exp11 drawing API function as an example, select EXP11.MCP after the selection of files to compile, in the appropriate folder before the blank click, the header file library file cannot be selected, because it has been included in the source code. Click Make to compile the connection, compile the result to 4 warnings, 15 additional information, see.

6.

12	在虚拟机中使用 vi修改 /root/.bash_profile。文件中的 PATH变量为 PATH=$PATH:$HOME/bin:/opt/host/armv4l/bin/ （因为该文件隐藏系统， 所以使用 ls 命令不可见）存盘后执行： source/root/.bash_profile，则以后armv4l-unknow-linux-gcc会自动搜索到，可以在终端上输入。

second, the problems encountered and solutions

1, select the file to be compiled, in the corresponding folder before the blank click, the header file library file cannot be selected, because it has been included in the source code. Click Make to compile a connection with 4 warnings and 15 additional information

(Note: The reason for the compilation failure may be that the path contains Chinese or exp11_data issues)

2.

Iii. Summary of EXP3 learning

Iv. Experience

Basic _EXP3 of information security system design