Basic vro configurations

Parameter settings
The following assumes that the route name is nb-r-01
Log on to the route
Nb-r-01> enable
Password: "Enter enable secrect password
Nb-r-01 # conf ter
Enter configuration commands, one per line. End with CN
　　
Network ID
Nb-r-01 # conf ter
Nb-r-01 (config) # router rip
Nb-r-01 (config-router) # network 202.96.102.0
Nb-r-01 (config-router) # network 202.96.100.0
Nb-r-01 (config-router) # network 202.96.101.0
　　
The preceding command is used to let the route know all the networks connected to it.
Because the site involves three Class C addresses, you need to add them one by one.
Nb-r-01 (config-router) # exit
　　
IP settings
Nb-r-01 (config) # ip host server 202.96.101.202
"Ip address of the host
Nb-r-01 (config) # ip name-server 202.96.101.201
"Ip address of the Domain Name Server
Nb-r-01 (config) # tacacs-server host 202.96.101.202
"Ip address of the host running tacacs +"
Nb-r-01 (config) # tacacs-server key I Love NingBo
"Define the tacacs + key, which should be the same as the definition in the program.
　　
Menu settings
Nb-r-01 (config) # menu dial_menu title "Please select one connection method to NBNET"
Nb-r-01 (config) # menu dial_menu text 1 Login to local sun unix server
Nb-r-01 (config) # menu dial_menu command 1 telnet server
Nb-r-01 (config) # menu dial_menu text 2 PPP connection
Nb-r-01 (config) # menu dial_menu command 2 ppp
Nb-r-01 (config) # menu dial_menu text 3 SLIP connection
Nb-r-01 (config) # menu dial_menu command 3 slip
Nb-r-01 (config) # menu dial_menu text 4 Exit
Nb-r-01 (config) # menu dial_menu command 4 exit
Nb-r-01 (config) # menu dial_menu line-mode
Nb-r-01 (config) # menu dial_menu single-space
　　
The preceding command defines a menu named dial_menu.
The first sentence is its title.
The second sentence is to define the text to be displayed for the menu item
The third sentence is to define the command to be executed
The fourth, fifth, sixth, seventh, eighth, and ninth sentences are the same as above.
In the Tenth sentence, Enter after selecting
The fifth sentence is a line of each menu item.
　　
Welcome text
Nb-r-01 (config) # banner login "Welcome to CNET (CHINANET )!"
Nb-r-01 (config) # banner motd "Welcome to CNET (CHINANET )!"
　　
The preceding command defines the welcome text displayed when you enter the route.
　　
Asynchronous line settings
Nb-r-01 (config) # line 1 16
"Set the first to 16th lines
Nb-r-01 (config-line) # modem InOut
"Set this line to allow both outgoing calls and incoming calls.
Nb-r-01 (config-line) # autocommand menu dial_menu
"The menu is automatically executed when the line is logged in.
　　
The following command is used to set the chat-script to be executed when the route and modem are executed.
Nb-r-01 (config-line) # script startup ultra
"Execute chat-script ultra when the modem is up.
Nb-r-01 (config-line) # script connection ultra
"When the two are connected, execute chat-script ultra
Nb-r-01 (config-line) # script dialer cisco-default
Nb-r-01 (config-line) # script reset ultra
"When the line is reset, execute chat-script ultra
Nb-r-01 (config-line) # script activation ultra
"When the line is active, execute chat-script ultra
Nb-r-01 (config-line) # transport input all
Nb-r-01 (config-line) # escape-character BREAK
Nb-r-01 (config-line) # exit "exit configure status
Nb-r-01 (config) # exit
Nb-r-01 # write "write the above settings into memory
　　
Summary
　　
Vro provides several modes
The private mode is used to copy and manage the entire configuration file.
Use commands to manage the entire vro in global Mode
Other configuration modes are used for multiple command processing and detailed configuration.
Vro protects configurations with multiple passwords
The vro uses hostname banner and port description descriptions to authenticate the vro.
　　
1 Exec commands:
　　
<1-99> restore a session
Bfe manual emergency mode settings
Clear Reset Function
Clock of clock management system
Configure enters the setting mode.
Connect to open a terminal
Copy: copy the setting file from the tftp server or copy the setting file to the tftp server.
Debug debugging
Disable exit priority command status
Disconnect disconnects a network.
Enable enters the priority command status
Erase erased flash memory
Exit to exit exce Mode
Description of the help interaction help system
Lat opens a local transmission connection
Lock Terminal
Login logs in as a user name
Logout Terminal
Mbranch traces multi-route broadcast to the bottom branch of the tree
Mrbranch traces reverse multi-route broadcast to the top branch of the tree
Name-connection: name an existing network connection
No. Disable debugging.
Pad open X.29 PAD connection
Ping to send Echo information
Ppp start point-to-point connection protocol
Reload stopped and perform cold start
Resume resumes an active network connection.
Rlogin opens Remote Registration connection
Rsh executes a remote command
Send to another terminal line
Setup
Show Displays running system information
Slip starts the SLIP Protocol
Description of the start-chat dialog executed on the command line
Systat: displays terminal line information.
Telnet Remote Logon
Terminal line parameters
Test sub-system memory and Port
Tn3270 open a tin3270 connection
Trace route to destination
Undebug exit debugging
Verify the total number of blinking files
Where displays active connections
Which-route: Execute the OSI route table search and display the result
Write writes the running settings to the memory, network, or terminal.
X3 set X.3 parameters on PAD
Xremote enters xremote Mode
　　
2 # show?
　　
Access-expression: displays the access control expression.
Access-lists display access control table
Apollo Network Information
Appletalk Apple Talk Information
Arap displays statistics of Appletalk remote Channels
Arp Address Resolution Protocol Table
Async terminal line information for accessing the routing Interface
Bridge forward Network Database
Buffers buffer pool statistics
Clns CLNS Network Information
Clock Display System clock
Network Service Information of cmns connection mode
Compress shows the compression status
Configuration non-volatile memory content
Controllers port control status
Debugging debug option status
Decnet DEC Network Information
Dialer dialing parameters and statistics
Dnsix displays Dnsix/DMPP Information
Entry queuing terminal entry
Extended Port Information
Flash system flash Information
Flh-log flashes to load the help log Buffer
Frame-relay frame relay information
History display dialog layer history commands
Hosts IP domain name, search method, name service, host table
Interfaces port status and settings
Ip address information
Ipx Novell IPX Information
IS-IS routing information
Keymap terminal keyboard ing
Lat dec lat Information
Line terminal line Information
Llc2 IBM LLC2 loop information
Lnm IBM Bureau Network Management
Local-ack local cognitive virtual Loop
Memory statistics
Netbios-cache NetBios Name Buffer Memory
Node displays known LAT nodes
Ntp Network Time Protocol
Processes activity process Statistics
Protocols Active Network Routing Protocol
Queue display queue content
Queueing display queue settings
Registry Registration Information
Rhosts remote host file
Rif RIF storage entry
Route-map Router Information
Sdlle displays sdlc-llc2 conversion information
Services known LAT Service
Sessions remote connection information
Smds Information
Source-bridge source bridge Parameters and statistics
Spanning-tree spanning tree topology
Stacks process stack Application
Standby hot support protocol information
Stun STUN status and settings
Subsystem display subsystem
Tcp TCP connection status
Terminal settings
Tn3270 TN3270 settings
Translation protocol conversion information
Ttycap terminal easy table
Users displays terminal Line Information
Version system hardware and software status
Vines VINES Information
Whoami current terminal Line Information
X25 X.25 Information
Xns XNS Information
Xermote Xremote statistics
　　
3 # config?
　　
Memory settings from non-volatile Memory
Network slave TFTP Network host settings
Overwrite-network Overwrite non-volatile memory from the TFTP network host settings
Terminal settings
　　
4 Configure commads:
　　
Access-list adds an Access control domain
The global setting command of Apollo
Appletalk Appletalk global setting command
Arap Appletalk Remote Access Protocol
Arp sets a static ARP entry
Async-bootp modify system startup parameters
Autonomous-system local Special autonomous system Member
Banner defines registration display information
Modify system startup parameters
Bridge transparent bridge
Buffers: Adjust System Buffer Pool Parameters
Busy-message defines the information displayed when the host fails to be connected
Chat-script defines a modem conversation text
Clns global CLNS settings sub-commands
Clock
Config-register
Decnet global DEC network settings sub-command
Default-value default character bit value
Dialer-list
Dnsix-nat provides DMDM services for Auditing
Enable
End exits from the set mode.
Exit from the set mode
Frame-relay global frame relay Setting command
Description of the help interaction help system
Set the system network name for hostname
Iterface select the port
Ip Global Address Settings sub-commands
Ipx Novell/IPX global setting command
Keymap defines a new keyboard ing
Lat DEC local transmission protocol
Line
Lnm IBM Bureau Network Management
Locaddr-priority-list creates a priority queue on the LU address
Logging modify registration (device) Information
Login-string defines the registration string specified by the host
Map-class: set static table classes
Map-list
Menu
Mop sets the dec mop Server
Netbios NETBIOS Channel Control Filtering
No. deny a command or change it to the default setting.
Ntp settings
Priority-list create privilege list
Prompt set system prompt
Queue-list create a regular queue list
Rcmd Remote Command setting command
Rcp-enable open Rep Service
Rif source route Process
Router-map: Create a route table or enter the command mode of the route table.
Router opens a route Process
Rsh-enable to open an RSH service
Sap-priority-list creates a priority queue on the SAP or MAC address.
Service modifies Basic Network Services
Snmp-server modify SNMP Parameters
State-machine defines a machine in the TCP allocation status.
Stun STUN global settings command
Tacacs-server modify TACACS queue Parameters
Terminal-queue terminal queue command
Tftp-server provides TFTP service for network load requests
Tn3270 tn3270 setting command
Translate command to explain global settings
Username creates a user name and its permissions
Vines VINES global settings command
Level 3 of x25 X.25
X29 X.29 command
Xns XNS global setting command
Xremote setting Xremote
　　
5 (config) # ip
　　
Global IP configuration subcommands:
Accounting-list: select the host that saves IP Accounting information.
Accounting-threshold
Accounting-transits: set the maximum number of entries passed
Alias for the IP address of the alias TCP port
As-path BGP Autonomous System path Filtering
The cache-invalidate-delay IP address routing storage pool is invalid.
Classless follows non-class forward routing rules
Default-network indicates that the network is a candidate for the default gateway.
Default-gateway specifies the default network (if no Route IP address is available)
Domain-list: complete the domain Name of the unqualified host
Domain-lookup open IP domain Name Service System host Conversion
Domain-name defines the default domain name
Forward-protocol controls forward, physical, and direct IP address broadcast
Host adds an entry to the IP host table
Host-routing)
Hp-host open HP proxy probe Service
Mobile-host mobile host database
Multicast-routing
Name-server specifies the server address by name
Ospf-name-lookup displays OSPF routes as DNS names
Pim PIM Global Command
Route
Routing
Security: System security Information
Source-route
Subnet-zero allows subnet 0 subnet
Tcp global TCP Parameters
Article entry: csh responsible editor: csh