Beiyang Printer Black Label paper printing setup

Method one, through the drive to set up

In the drive is mainly to set the paper type, the paper type is set to Black label paper, the setting method is set in the printing time, and not directly in the driver set!

Method Two: Through the printer to test paper

Check the black mark (before checking to set the induction type as described in the downstairs (above)):

The printer is turned off-> put in the black tag-> and press "feed", "pause", "Cancel" button-> power-on on the power-> to be only "feed", "pause" light when the-> printer is paused-> Click the pause button-> The start checksum-> a successful checksum.

Through the above two methods can be used to solve the northern Beiyang Printer Black Label problem, or the combination of the above two methods to use! If you have not solved your problem, it should be black Label sensor problems, so you can contact your equipment suppliers to solve!