Beiyang Printer How to restore to factory settings

For the common Market on the Beiyang barcode printer, Shenzhen mutual trust and technology to sort out the following models of Beiyang Barcode printer operation and settings, applicable with the following models: Btp-6200i, btp-2100e, btp-2200e, btp-2300e:

(1) Print configuration proofs

First turn off the power of the printer, and then press and hold the printer "feed key" do not put, while turning on the printer power, and so on the printer after a tweet and then release the hand, you can print out the configuration proofs.

(2) Check paper

First turn off the power of the printer, and then hold down the printer "pause button" do not put, while the printer power supply, and so on the printer after a beep and then release the hand, you can do paper check.

(3) Restore default communication settings

First turn off the printer power, and then press and hold the printer "Cancel key" do not put, at the same time, turn on the printer power, such as the printer after a beep and then release the hand, you can restore the default communication settings.

Description: btp-2000s will permanently restore the default communication settings, and other printers can only temporarily change the printer's communication settings to: "9600,n,8,1" and not save the configuration after restarting the printer.

(4) Restore default parameter settings:

First turn off the power of the printer, and then press and hold the printer "Cancel key" do not put, while the power of the printer, and so on the printer after the second beep and then release the hand, you can restore the default parameter settings. (Note that this feature requires an ARM platform printer to be implemented).

Beiyang Btp-l42, btp-1000pt, btp-1000ptii printer settings:

(1) Print configuration proofs:

First turn off the printer power, and then hold down the printer "feed key" do not put, while turning on the printer power, such as the printer power led flashing once again release the hand, you can print out the configuration proofs.

(2) Check paper:

First turn off the printer power, and then hold down the printer "feed key" do not put, while the printer power supply, and so on the printer power LED flashing continuously two times and then release the hand, you can do paper check.

(3) Restore default communication settings:

First turn off the printer power, and then hold down the printer "feed key" do not put, while the printer power supply, and so on the printer power LED flashing continuously three times before releasing the hand, you can restore the default communication settings (Note: This method can temporarily change the printer's communication settings to: "9600,n,8,1", The configuration is not saved after restarting the printer.