Booz C168 Print not clear the possible factors!

Booz C168 Small barcode printer has been widely used in the market, we in the printing process, often encounter such a problem, this article on the printing bar code is not clear why the simple analysis, in general, the Ribbon and the label is correct, the Ribbon is installed correctly, the printhead is intact, printing temperature is normal , already other factors are likely to lead to print quality problems, now Shenzhen Trust Heng Technology engineers based on actual work experience, may affect the printing of factors such as:

1, the use of poor color ribbon, please reinstall the better performance of the Ribbon.

2, the use of poor quality label paper, greatly reducing the color belt transfer ability, please replace the performance of the label Paper Test.

3. Low temperature setting, the temperature of the printhead heating is too low, resulting in the carbon ribbon on the toner can not be all transferred to the label paper, generally as long as the machine, the Ribbon is in good condition, as long as the high temperature, the effect is more clear (but do not adjust too high, too high is easy to burn the ribbon, the paste, and the

4. May be the print head is dirty, can be wiped with an alcohol swab

5. It is possible that ribbons and labels do not match, for example, with the pet material with a mixed ribbon, the effect is certainly not with the whole resin carbon with apple good

6. The printhead is used too long, the wear is serious, the printed content takes a little bit, need to replace the new printhead

7. Uneven force on the print head. Adjust the pressure bar until the good results are played.

8. Cots wear badly and need to be replaced. Replace the new rubber rollers.

Steps and methods for cleaning the barcode print head:

1. Power off the printer.

2. Open the printer housing and lift the print head.

3, if the printer works in the thermal transfer mode, you need to remove the ribbon, exposing the print head.

4, with a cotton ball containing anhydrous alcohol gently wipe the print head, cots, remove the above dust, dirt and so on.

5, after the alcohol volatilization, the printer can be reused.

Note: Do not scratch the print head during the cleaning process. Regular Maintenance Barcode Printhead You can clean the print head when you find that the barcode is not clear during the printing process.