Browser Blue 0x00000050 and Igdpmd64.sys

Use the notebook in the update system files or after the hit, open IE browser, the computer appears blue screen, and the blue Screen code for 0x00000050 and Igdpmd64.sys information (as shown below), this problem may be installed with the KB2670838 system patch.

Refer to the following four methods to solve, the last one is only suitable for Lenovo notebook computer.

The first method: Manually uninstall the KB2670838 system patch.

Point "Start-> settings-> Control Panel", double-click Add/Remove Programs, then select the "Show Updates" item (pictured below), then pull the scroll bar, find the KB2670838 system patch, click to select, point to the right of the "delete" button to uninstall the KB2670838 system patch, Restart your notebook again.

The second approach is to use a browser other than the IE kernel: Google Chrome or Firefox.

The third way: Manually set to display high-performance work or set the power-saving mode of work

The third way: Manually set to display high-performance work or set the power-saving mode of work

Step 1: Right mouse button Select "Display Card Properties" as shown below:

Step 2: Click "Preferences" to select "Advanced View"

Step 3: Select the Power option. Select the Toggle display card mode

Step 4: Select the graphics processor manually or according to the power supply

Step 5: Click "Change" to switch

Step 6: Click on the "switchable display card" To manually choose to use the "high-performance GPU" to work alone, or use "power-saving GPU" set to display work, and then click the "Apply" button below.

The fourth approach is to set up in the BIOS so that the laptop only uses an integrated display card.

The fourth approach is to set up in the BIOS so that the laptop only uses an integrated display card.

(a), for idea notebook

1. At the boot logo, press F2 to enter the BIOS.

2. Set [Configuration]->[graphic Device] to [UMA Graphic] (figure below)

(b), for ThinkPad notebooks

Press F1 to enter the BIOS setup interface, select [Config]->[display]->[graphics Device] and set to [integrated Graphics] (figure I).

Figure I

Then, select "CONFIG"-> "Display"-> "OS Detection for switchable Graphics" and set to "Disable" (see figure II).