Cable TV set-top box cracking tutorial

Cable TV set-top box cracking tutorial

After cracking, you can watch the paid channel.

Every file in it should be carefully read. negligence may cause failure.

Steps for writing a set-top box Program

In this step, the serial port of the set-top box is upgraded. A serial port is used to connect the PC to the set-top box.

Cable TV set-top box cracking steps:
Step 1: Open "Mini terminal minicomm ";

Step 2: In "communication", click "establish connection" and configure serial port settings in Appendix 1 of the serial port setting key;

Step 3: Keep pressing enter ";

Step 4: power on the set-top box;

Step 5: Wait for the mini terminal to appear: testtool>;

Step 6: Enter "* Boot" and press the Enter key. The following message is displayed: Wait for the boot file to be sent from the serial port .........;

Step 7: In the "communication" menu, click "Send File". In the pop-up directory box, find the program to be written (boot_rs232.bin) and open it. Then wait (about 8 minutes ). Until testtool> is displayed. It indicates that boot has been written;

Step 8: restart the set-top box (or press * reset ).

Step 9: Use the upgrade tool "STB"-Search.exe "Upgrade Program (Listen 5105_program _. Bin), font (shuyuan_font _ *. Bin), and loader,Cable TV set-top box crackingIt has been completed.